Patton electronic 2160 user manual Trap host, Please input the following information

Model 2160 Series User Manual		5 • Console and Telnet configuration
-----------------------------------------------------------------------------
Command:	... 2 edit <DisableEnable> <string> <Read_OnlyRead_WriteDenied>
Message:	Please input the following information.

Validate (TAB Select) <Enable>: Enable Community (ENTER for default) <private>: Access right (TAB Select) <Denied>:

-----------------------------------------------------------------------------

You can set up the following options:

•Validate: Set to Enable or Disable.

•Community: Enter the desired password for community access.

•Access right: Set to Read only, Read Write or Denied.

Read_Only	Users have read-only access to the community
Read_Write	Users have read and write access to the community
Denied	There is no access to the community

Use the list command to view all SNMP community pool entries. You can also confgiure five SNMP trap entries.

Trap host

To set up SNMP traps, move the cursor “ >>” to trap in the snmp menu and press Enter. You can configure five trap entries.

	----------------------------------------------------------------------
	Command: admin snmp trap <1~5> <more...>
	Message: Please input the following information.
	Trap host entry number <1~5> : 2
	----------------------------------------------------------------------
The following menu displays:
>> edit	Edit trap host parameter
list	Show trap configuration

Select edit and press Enter.

-----------------------------------------------------------------------------

Command: admin snmp trap 1 edit <Disable12> <ip> <string>

Message: Please input the following information.

Version (TAB Select) <Disable>:

Trap host IP address (ENTER for default) <192.168.0.254>:

Community (ENTER for default) <private>:

-----------------------------------------------------------------------------

Administration Command Menu 98