Model 2160 Series User Manual5 • Console and Telnet configuration
Command: admin security ip_pool modify <1~16> <ip>
Message: Please input the following information.
Client address pool entry number <1~16>: 1 Client IP address (ENTER for default) <0.0.0.0>:
You can configure up to sixteen entries for legal address pools. Use the clear command to remove a legal client IP address from any pool entry number. Use the list command to view information for all of the security pro- files, including the Telnet TCP port and the legal IP addresses.
SNMP
Simple Network Management Protocol (SNMP) provides the exchange of messages between a network man- agement client and a network management agent for remote management of network nodes. These messages contain requests to get and set variables that exist in network nodes in order to obtain statistics, set configura- tion parameters, and monitor network events. SNMP communications can occur over the LAN or WAN con- nection.
The Model 2160 can generate SNMP traps to indicate alarm conditions, and it relies on SNMP community strings to implement SNMP security. This Model 2160 support both MIB I and MIB II.
The snmp command menu lists commands for configuring SNMP communities and traps. Move the cursor “ >>” to snmp in the admin menu and press Enter. The following menu displays:
>> community | Configure | community | parameter |
trap | Configure | trap host | parameter |
Community
To set up SNMP communities, move the cursor “ >>” to community in the snmp menu and press Enter. You can configure five community entries.
| |
| Command: admin snmp community <1~5> <more...> |
| Message: Please input the following information. |
| Community entry number <1~5> : 2 |
| |
The following menu displays: | |
>> edit | Edit community entry |
list | Show community configuration |
Select edit and press Enter.
Administration Command Menu | 97 |