Model 2160 Series User Manual | 5 • Console and Telnet configuration |
|
|
When using the fixed host entry function, you must enter the MAC address and IP address at the same time. You can configure up to 10 maximum fixed host IP addresses.
Use the list command to view the DHCP configuration.
DNS Proxy
The dns_proxy command allows you to set up three DNS servers for the Model 2160. Move the cursor “ >>” to dns_proxy in the setup menu and press Enter.
Command: setup dns_proxy <IP> [IP] [IP]
Message: Please input the following information.
DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1
DNS server 2: 10.10.10.1 DNS server 3:
Host Name
A Host Name is a unique name that attaches a host to a network. The hostname is used to identify a particular host in various forms of electronic communication. Some ISP providers require the Host Name as identifica- tion. You may check with your ISP to see if your Internet service has been configured with a host name. In most cases, you can ignore this field.
Move the cursor “ >>” to hostname in the setup menu and press Enter. The host name cannot use spaces and cannot have more than 15 characters.
Command: setup hostname <name>
Message: Please input the following information.
Local hostname (ENTER for default) <SOHO>: test
Factory Default
If you want to restore factory default settings for the Model 2160, move the cursor “ >>” to default in the setup menu and press Enter.
Command: setup default <name>
Message: Please input the following information.
Are you sure? (Y/N): y
Setup Command Menu | 89 |