Xerox N4525 manual Using the Fsdelete command, NAME=pathname

Hard Disk Drive and Memory (DRAM and Flash ROM)

In this example, note that:

■

■

The case of the string ID must be the same as the case of the font name in the FSDOWNLOAD command.

The number of characters in the macro name (“6” in the above example) must equal the string ID byte count plus 1.

Using the FSDELETE command

The FSDELETE command is used to delete files from the printer’s file system.

Syntax

@PJL FSDELETE NAME = “pathname” [<CR>] <LF>

Parameters

Parameter	Functional Range	Default
NAME=”pathname”	ASCII 01 thru 255	N/A

NAME = “pathname” — where “pathname” has the same parameters as the FSDOWNLOAD command (see).

Using the Hard Disk Drive for Secure and Proof Printing and Collated Copying

These features* are available when the printer contains the optional hard drive. Use the secure print feature when you need to print a confidential document. Use the proof print feature when you have a job with multiple copies but want to check the first copy before proceeding with the remainder of the job.

Refer to the User Guide for instructions on printing a secure or proof job.

Secure, collated copy, and proof jobs that have been submitted to the printer are stored in PCL or PostScript format on the hard drive. The secure or proof job is placed at the top of the print queue, and prints following completion of the currently printing job. If more than one job is requested, jobs are placed in the print queue in the order requested. Secure or proof jobs having the same priority are printed on a first in, first out basis. When you enter the password at the printer, the printer only prints jobs associated with that password.

*Collated set jobs can be created without a driver by using the “Select Collated Sets” PJL command (@PJL SET QTY...) described in Appendix C - Unique Printer Commands.

Advanced Features and Troubleshooting Manual 57