|
|
| Control Panel Menus |
Tray Menu Items (cont'd.) |
|
| |
|
| ||
Special Media | The fusing system of the DocuPrint N4525 printer can be adjusted in two | ||
Printing | ways to accommodate various types of special print media: | ||
| ■ The fusing temperature can be varied to match the requirements of the | ||
| media. |
|
|
| ■ Brief printing delays can be set to occur at | ||
| fuser temperature to recover properly for heavier weight media. The | ||
| selected delay (15 seconds, 30 seconds, 45 seconds or 60 seconds) will | ||
| occur before the printing begins, and then after every 15 pages while the | ||
| printing is in progress. |
| |
| When the Config Fuser selection in the Tray Menu is set to On, media | ||
| types are available as menu items (also in the Tray Menu). This enables the | ||
| user to set fuser temperatures and delays appropriately to match the | ||
| requirements of each media type. |
| |
| The following settings are available: |
| |
| Fuser Setting | Description | Examples of Usage |
| Normal | Normal Temperature, No Delay | Ordinary Plain Paper |
| Low | Low Temperature, No Delay | Transparency, Plastic label |
| High | High Temperature, No Delay | Card Stock |
| High - 15 sec. | High Temperature, 15 sec. Delay | Heavier Card Stock |
| High - 30 sec. | High Temperature, 30 sec. Delay | Heavier Card Stock |
| High - 45 sec. | High Temperature, 45 sec. Delay | Heavier Card Stock |
| High - 60 sec. | High Temperature, 60 sec. Delay | Heavier Card Stock |
For optimum results, temperature/delay settings should be based on the weight of the paper stock.
If using delays, send your output to either the
Fuser temperatures and delays can be set for each paper type from the control panel. It may require some experimentation to obtain optimal prints.
Once the desired fuser settings have been stored for each media type, the procedure for printing on special media is as follows:
■Load the special media into a paper tray.
■Set Tray Type to match the special media loaded in the tray.
■From the driver properties screen, choose Select Paper, then set Type to match the type of special media loaded in the tray.
Advanced Features and Troubleshooting Manual | 15 |