Patton electronic 4020 Series manual Installing the router, Do the following

Page 22

SmartLink 4020 Getting Started Guide	2 • SmartLink installation

Installing the router

Do the following:

Power adapter

	Internet Service
	Provider
	PC or	--or--	LAN	Phone
	LAN		Hub/Switch
6	5	4		3

Power

www.patton.com

10/100 Ethernet

Phone

12V, 1A

WAN

LAN

1

2

Power jack

Reset button

WAN port

LAN port

Phone jack 1

Phone jack 2

Figure 2. SmartLink 4020 installation diagram

1Place the unit on a desktop or similar sturdy, ﬂat surface that offers easy access to the cables. The unit should be installed in a dry environment with sufﬁcient space to allow air circulation for cooling.

Note For proper ventilation, leave at least 2 inches (5 cm) of clearance at the sides, front, and rear of the unit.

2Set your LAN Local Area Connection Properties for Internet Protocol (TCP/IP) to Obtain an IP address automatically and to Obtain DNS server address automatically.

WARNING

CAUTION

Do not work on the system or connect or disconnect cables during periods of lightning activity.

The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to volt- age, current, anticipated temperature, ﬂammability, and mechani- cal serviceability

3Plug in the telephone or telephones (see ﬁgure 2).

4Plug in the PC or LAN, or a LAN hub/switch.

Installing the router

22

Image 22

Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricityGeneral observations Typographical conventions used in this documentGeneral conventions Chapter contents General informationSmartLink 4020 overview SmartLinkSmartLink installation Installing the router Do the followingConnect to the Internet service provider Home System information System UptimeWAN IP Address System informationSystem Uptime LAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Status Network SettingsInterface Status Settings Obtain WAN conﬁguration dynamically Device Operating ModeInternet Conﬁguration Specify ﬁxed WAN conﬁgurationSettings Enable PPPoEAuthentication WAN PPPoE ConﬁgurationMAC Spooﬁng Conﬁguration Conﬁguring Dynamic DNSWAN MAC Address Spoofed WAN Vlan Conﬁguration MTU SizeSaving your work ToS/DiffServ QoS Quality of ServiceEnable Voice QoS Assured Bandwidth for VoiceIPSec Conﬁguration Outbound ESP Authentication Key HEX Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Inbound AH Authentication AlgorithmInbound ESP Authentication Key HEX Network-LAN Dhcp Static Address Assignment Server SettingsClient Network Information Viewing the Dchp Client TableStatic Routing RoutingDynamic Routing Viewing the Routing TableReserved Ports Port ForwardingIP Filtering Port Forwarding to LANFilter IP Range Telephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Subscribed for Voicemail Caller ID SettingUser Name Messages waitingGateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration Hook Flash Mime Type SIP Timer Values millisecondsSIP Parameters RTP ParametersNAT Traversal Packetization Audio/CODEC ConﬁgurationJitter Buffer Phone 1 & Phone FAX without T.38 Use G.711 faxSupplementary Service Activation User InformationSelective Call Forward Message Waiting IndicatorCall Forward All Three-Way ConferencingDial Out Type Call Forward Settings Selective Call Forward SettingsBlock Caller ID Http Digest SettingIncoming Call Block Outgoing Call BlockSpeed Dial Line 1 Speed Dial SettingsLine 2 Speed Dial Settings Speed Dial ServSystem System System New User Password Set Security PasswordNew Root Password Web Page ProtectConﬁguration Conﬁrm new passwordEnable Syslog LoggingDebug Connect Port Enable DebugDebug Server Saving your workEnable Ping Reply Service AccessEnable Http LocalizationPrompt Tone Call Progress TonesDial Tone Conﬁrm ToneRing Back Tone Distinctive Ring SettingBusy Tone Off Hook WarningSupplementary Service Keys Name ValueWarm Line Call forward selectiveBlock Anonymous Calls IP DialingIncome Caller ID Speed DialingCalling Preﬁx Keys Call Waiting call alternative Voicemail accessCall Hold Call ConferenceControl Timer Values Ring Setting FXS PortFXS Port Polarity Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp Community Conﬁguration Auto UpgradeRoutine Upgrade every xxx days Snmp System ConﬁgurationAuto Upgrade Protocol Manual UpgradeEnable Auto Upgrade Upgrade ServerReload Documentation Introduction Documentation linkLogout Logout window Logout Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Return for credit policy Out-of-warranty serviceReturns for credit RMA numbersAppendix a Compliance information Radio and TV Interference Safety ComplianceCompliance CE notice Declaration of ConformityAppendix B Speciﬁcations Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem SupportManagement Voice Services/FeaturesIP Services Operating EnvironmentAppendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF