Patton electronic 4020 Series manual QoS Quality of Service, ToS/DiffServ, Enable Voice QoS

Page 35

SmartLink 4020 Getting Started Guide	4 • Network—WAN

QoS (Quality of Service)

Figure 12. QoS window

Enable Voice QoS

Enable or disable the voice quality of service function. When QoS is enabled, the SmartLink 4020 will priori- tize and rate-limit the introduction of voice and data trafﬁc onto the WAN interface.

Assured Bandwidth for Voice

This parameter deﬁnes the guaranteed bandwidth for voice trafﬁc on the WAN interface (in kbits/sec).

Maximum Uplink Bandwidth Allowed

The maximum uplink bandwidth that can be allocated to voice trafﬁc.

Saving your work

When you are ﬁnished conﬁguring settings, click the Save Settings button to save the changes.

ToS/DiffServ

This sub-page is used to conﬁgure the Type-of-Service/Diffserv byte values which are to be used in the IP header of all transmitted SIP signaling packets and RTP packets. The ToS/DiffServ byte values are entered as two-digit hexadecimal values. If no special ToS/DiffServ value is to be used for a particular trafﬁc type, enter 00 or leave the setting empty.

Figure 13. TOS/DiffServ window

QoS (Quality of Service)

35

Image 35

Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Structure About this guideAudience Safety when working with electricity PrecautionsGeneral conventions Typographical conventions used in this documentGeneral observations General information Chapter contentsSmartLink SmartLink 4020 overviewSmartLink installation Do the following Installing the routerConnect to the Internet service provider System information System Uptime HomeLAN IP Address System informationSystem Uptime WAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Interface Status Network SettingsStatus Settings Specify ﬁxed WAN conﬁguration Device Operating ModeInternet Conﬁguration Obtain WAN conﬁguration dynamicallyWAN PPPoE Conﬁguration Enable PPPoEAuthentication SettingsWAN MAC Address Spoofed Conﬁguring Dynamic DNSMAC Spooﬁng Conﬁguration Saving your work MTU SizeWAN Vlan Conﬁguration Assured Bandwidth for Voice QoS Quality of ServiceEnable Voice QoS ToS/DiffServIPSec Conﬁguration Inbound AH Authentication Algorithm Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Outbound ESP Authentication Key HEXInbound ESP Authentication Key HEX Network-LAN Dhcp Viewing the Dchp Client Table Server SettingsClient Network Information Static Address AssignmentViewing the Routing Table RoutingDynamic Routing Static RoutingPort Forwarding to LAN Port ForwardingIP Filtering Reserved PortsFilter IP Range Telephony Telephony Telephony Phone Line Status VoIP StatusVoIP Server Registration Status Messages waiting Caller ID SettingUser Name Subscribed for VoicemailSIP Conﬁguration SIP Server SettingsGateway Settings VoIP Vlan Conﬁguration SIP ExtensionsRTP Telephone Event Conﬁguration RTP Parameters SIP Timer Values millisecondsSIP Parameters Hook Flash Mime TypeNAT Traversal Jitter Buffer Audio/CODEC ConﬁgurationPacketization FAX without T.38 Use G.711 fax Phone 1 & PhoneUser Information Supplementary Service ActivationThree-Way Conferencing Message Waiting IndicatorCall Forward All Selective Call ForwardDial Out Type Selective Call Forward Settings Call Forward SettingsOutgoing Call Block Http Digest SettingIncoming Call Block Block Caller IDSpeed Dial Serv Line 1 Speed Dial SettingsLine 2 Speed Dial Settings Speed DialSystem System System Web Page Protect Set Security PasswordNew Root Password New User PasswordLogging Conﬁrm new passwordEnable Syslog ConﬁgurationSaving your work Enable DebugDebug Server Debug Connect PortLocalization Service AccessEnable Http Enable Ping ReplyConﬁrm Tone Call Progress TonesDial Tone Prompt ToneOff Hook Warning Distinctive Ring SettingBusy Tone Ring Back ToneName Value Supplementary Service KeysIP Dialing Call forward selectiveBlock Anonymous Calls Warm LineCalling Preﬁx Keys Speed DialingIncome Caller ID Call Conference Voicemail accessCall Hold Call Waiting call alternativeControl Timer Values FXS Port Ring SettingSnmp Trap Conﬁguration Snmp ConﬁgurationFXS Port Polarity Conﬁguration Snmp System Conﬁguration Auto UpgradeRoutine Upgrade every xxx days Snmp Community ConﬁgurationUpgrade Server Manual UpgradeEnable Auto Upgrade Auto Upgrade ProtocolReload Documentation Documentation link IntroductionLogout Logout window Logout Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information RMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information CE notice Declaration of Conformity Safety ComplianceCompliance Radio and TV InterferenceAppendix B Speciﬁcations Fax and Modem Support Voice Processing signalling dependentVoice Connectivity ConnectivityOperating Environment Voice Services/FeaturesIP Services ManagementAppendix C Dial plans Complex Dial Plan Sample Dial PlansSimple Dial Plan Non-dialed Line Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF