Patton electronic 4020 Series manual Internet Conﬁguration, Device Operating Mode

Page 31

SmartLink 4020 Getting Started Guide	4 • Network—WAN

Internet Conﬁguration

Figure 6. Internet Conﬁguration section of the Settings window

Device Operating Mode

Choose Router or Bridged depending on your operation.

Obtain WAN conﬁguration dynamically

Select this option if appropriate. If you choose Obtain WAN conﬁguration dynamically, the information is detected automatically through DHCP.

Specify ﬁxed WAN conﬁguration

Select this option if you will not be using DHCP. If you choose Specify ﬁxed WAN conﬁguration, you will have to enter the following information:

•IP address.

•IP of the netmask.

•IP of the gateway.

•IP of the DNS Server, if applicable.

•Host name (the name will identify the computer on the Internet, such as SL4020.patton.com).

•Domain name (the name that will identify one or more IP addresses). For example, the patton.com domain is used by Patton Electronics Company. That domain can include multiple hostnames (such as SL4020.patton.com, ftp.patton.com, and so on) that point to individual computers on the Patton network. In short, for the hostname URL http://www.patton.com, the domain name is patton.com.

Settings

31

Image 31

Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Audience About this guideStructure Safety when working with electricity PrecautionsGeneral observations Typographical conventions used in this documentGeneral conventions General information Chapter contentsSmartLink SmartLink 4020 overviewSmartLink installation Do the following Installing the routerConnect to the Internet service provider System information System Uptime HomeLAN IP Address System informationSystem Uptime WAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Status Network SettingsInterface Status Settings Specify ﬁxed WAN conﬁguration Device Operating ModeInternet Conﬁguration Obtain WAN conﬁguration dynamicallyWAN PPPoE Conﬁguration Enable PPPoEAuthentication SettingsMAC Spooﬁng Conﬁguration Conﬁguring Dynamic DNSWAN MAC Address Spoofed WAN Vlan Conﬁguration MTU SizeSaving your work Assured Bandwidth for Voice QoS Quality of ServiceEnable Voice QoS ToS/DiffServIPSec Conﬁguration Inbound AH Authentication Algorithm Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Outbound ESP Authentication Key HEXInbound ESP Authentication Key HEX Network-LAN Dhcp Viewing the Dchp Client Table Server SettingsClient Network Information Static Address AssignmentViewing the Routing Table RoutingDynamic Routing Static RoutingPort Forwarding to LAN Port ForwardingIP Filtering Reserved PortsFilter IP Range Telephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Messages waiting Caller ID SettingUser Name Subscribed for VoicemailGateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration RTP Parameters SIP Timer Values millisecondsSIP Parameters Hook Flash Mime TypeNAT Traversal Packetization Audio/CODEC ConﬁgurationJitter Buffer FAX without T.38 Use G.711 fax Phone 1 & PhoneUser Information Supplementary Service ActivationThree-Way Conferencing Message Waiting IndicatorCall Forward All Selective Call ForwardDial Out Type Selective Call Forward Settings Call Forward SettingsOutgoing Call Block Http Digest SettingIncoming Call Block Block Caller IDSpeed Dial Serv Line 1 Speed Dial SettingsLine 2 Speed Dial Settings Speed DialSystem System System Web Page Protect Set Security PasswordNew Root Password New User PasswordLogging Conﬁrm new passwordEnable Syslog ConﬁgurationSaving your work Enable DebugDebug Server Debug Connect PortLocalization Service AccessEnable Http Enable Ping ReplyConﬁrm Tone Call Progress TonesDial Tone Prompt ToneOff Hook Warning Distinctive Ring SettingBusy Tone Ring Back ToneName Value Supplementary Service KeysIP Dialing Call forward selectiveBlock Anonymous Calls Warm LineIncome Caller ID Speed DialingCalling Preﬁx Keys Call Conference Voicemail accessCall Hold Call Waiting call alternativeControl Timer Values FXS Port Ring SettingFXS Port Polarity Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp System Conﬁguration Auto UpgradeRoutine Upgrade every xxx days Snmp Community ConﬁgurationUpgrade Server Manual UpgradeEnable Auto Upgrade Auto Upgrade ProtocolReload Documentation Documentation link IntroductionLogout Logout window Logout Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA RMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information CE notice Declaration of Conformity Safety ComplianceCompliance Radio and TV InterferenceAppendix B Speciﬁcations Fax and Modem Support Voice Processing signalling dependentVoice Connectivity ConnectivityOperating Environment Voice Services/FeaturesIP Services ManagementAppendix C Dial plans Complex Dial Plan Sample Dial PlansSimple Dial Plan Non-dialed Line Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF