SmartLink 4020 Getting Started Guide | 7 • System |
|
|
Service Access
Figure 42. Service Access window
Enable HTTP
When checked access to the web configuration interface (HTTP) of the SmartLink 4020 through the WAN interface port is enabled.
Note If the Enable HTTP option is not checked, your WAN service provider will no longer be able to access the SmartLink 4020 to make
configuration changes.
Enable Ping Reply
When checked, the SmartLink 4020 will reply to ping requests received on the WAN port. If the option is not checked, the SmartLink 4020 will not respond to ping requests received on the WAN port.
Saving your work
When you are finished configuring settings, click the Save Service Access Settings button to save the changes.
Localization
The Localization window contains the following sections:
•Call Progress Tones (see figure 43 on page 69)
•Distinctive Ring Setting (see figure 44 on page 70)
•Supplementary Service Keys (see figure 45 on page 72)
•Control Timer Values (see figure 47 on page 75)
•FXS Port (see figure 48 on page 76)
•Ring Setting (see figure 49 on page 76)
•FXS Port Polarity (see figure 50 on page 77)
Note After configuring the sections, click the Save button (see figure 50 on page 77) to save the new configuration.
Service Access | 68 |