Patton electronic 4020 Series manual Server Settings, Client Network Information

Page 41

SmartLink 4020 Getting Started Guide

5 • Network—LAN

 

 

Server Settings

Select Yes to enable or No disable DHCP. When enabled, the SmartLink 4020 will act as a DHCP server to devices connected to the SmartLink 4020 LAN port.

Client IP Address Range

Minimum and maximum limits on the range of IP addresses that will be allocated by DHCP to LAN attached devices. The IP addresses included in the block should not be statically assigned to non-DHCP devices on the LAN. The network portion of the Client IP Address Range is determined by the IP address and subnet mask specified under Network–LANsettings.

Client Network Information

Domain Name

LAN domain name provided to DHCP clients during the DHCP OFFER process.

DNS Server

This statically assigned DNS server IP address will be provided to clients during the DHCP OFFER process.

Static Address Assignment

Up to eight static DHCP address assignments can be configured. To add a static IP assignment, enter as host identifier the LAN device’s host name (must be unique in the private network) and/or MAC address. Specify the IP address to be assigned and press the Add button.

Viewing the DCHP Client Table

Click the View DHCP Table button to display the DHCP Client Table (see figure 17).

Figure 17. DHCP Client Table window

The Update button refreshes the displayed DHCP client table.

The Close button closes the open window and returns to the main menu.

The Clear client binding table button clears all dynamically assigned IP addresses on the SmartLink 4020 DHCP server.

Saving your work

When you are finished configuring DHCP server settings, click the Save DHCP Settings button (see figure 16 on page 40) to save the changes.

DHCP

41

Image 41
Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Structure About this guideAudience Safety when working with electricity PrecautionsGeneral conventions Typographical conventions used in this documentGeneral observations General information Chapter contentsSmartLink SmartLink 4020 overviewSmartLink installation Do the following Installing the routerConnect to the Internet service provider System information System Uptime HomeSystem Uptime System informationWAN IP Address LAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Interface Status Network SettingsStatus Settings Internet Configuration Device Operating ModeObtain WAN configuration dynamically Specify fixed WAN configurationAuthentication Enable PPPoESettings WAN PPPoE ConfigurationWAN MAC Address Spoofed Configuring Dynamic DNSMAC Spoofing Configuration Saving your work MTU SizeWAN Vlan Configuration Enable Voice QoS QoS Quality of ServiceToS/DiffServ Assured Bandwidth for VoiceIPSec Configuration Outbound AH Authentication Key HEX Outbound AH Authentication AlgorithmOutbound ESP Authentication Key HEX Inbound AH Authentication AlgorithmInbound ESP Authentication Key HEX Network-LAN Dhcp Client Network Information Server SettingsStatic Address Assignment Viewing the Dchp Client TableDynamic Routing RoutingStatic Routing Viewing the Routing TableIP Filtering Port ForwardingReserved Ports Port Forwarding to LANFilter IP Range Telephony Telephony Telephony Phone Line Status VoIP StatusVoIP Server Registration Status User Name Caller ID SettingSubscribed for Voicemail Messages waitingSIP Configuration SIP Server SettingsGateway Settings VoIP Vlan Configuration SIP ExtensionsRTP Telephone Event Configuration SIP Parameters SIP Timer Values millisecondsHook Flash Mime Type RTP ParametersNAT Traversal Jitter Buffer Audio/CODEC ConfigurationPacketization FAX without T.38 Use G.711 fax Phone 1 & PhoneUser Information Supplementary Service ActivationCall Forward All Message Waiting IndicatorSelective Call Forward Three-Way ConferencingDial Out Type Selective Call Forward Settings Call Forward SettingsIncoming Call Block Http Digest SettingBlock Caller ID Outgoing Call BlockLine 2 Speed Dial Settings Line 1 Speed Dial SettingsSpeed Dial Speed Dial ServSystem System System New Root Password Set Security PasswordNew User Password Web Page ProtectEnable Syslog Confirm new passwordConfiguration LoggingDebug Server Enable DebugDebug Connect Port Saving your workEnable Http Service AccessEnable Ping Reply LocalizationDial Tone Call Progress TonesPrompt Tone Confirm ToneBusy Tone Distinctive Ring SettingRing Back Tone Off Hook WarningName Value Supplementary Service KeysBlock Anonymous Calls Call forward selectiveWarm Line IP DialingCalling Prefix Keys Speed DialingIncome Caller ID Call Hold Voicemail accessCall Waiting call alternative Call ConferenceControl Timer Values FXS Port Ring SettingSnmp Trap Configuration Snmp ConfigurationFXS Port Polarity Configuration Routine Upgrade every xxx days Auto UpgradeSnmp Community Configuration Snmp System ConfigurationEnable Auto Upgrade Manual UpgradeAuto Upgrade Protocol Upgrade ServerReload Documentation Documentation link IntroductionLogout Logout window Logout Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbersAppendix a Compliance information Compliance Safety ComplianceRadio and TV Interference CE notice Declaration of ConformityAppendix B Specifications Voice Connectivity Voice Processing signalling dependentConnectivity Fax and Modem SupportIP Services Voice Services/FeaturesManagement Operating EnvironmentAppendix C Dial plans Simple Dial Plan Sample Dial PlansNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF