Patton electronic 4020 Series manual Dial Out Type

Page 58

SmartLink 4020 Getting Started Guide	6 • Telephony

Call Forward on Busy

Enable call forward on busy service.

Conditional Call Forward

Enable call forward selective service.

Call Waiting

Enable call waiting service.

Anonymous Call Reject

Enable block anonymous calls service—When enabled, calls from anonymous callers will be blocked.

Caller ID

Enable caller ID service.

Call Return

Enable call return service—When enabled, allows you to return a call to the last incoming call, whether the call was answered or not.

Do Not Disturb

Enable do not disturb service.

Self Caller ID Block

Enable blocking self caller ID shown in the outgoing message.

Outgoing Call Block

Enable blocking of outgoing calls based on the digit pattern speciﬁed under outgoing call block.

Dial Out Type

Figure 33. Dial Out Type section of Phone 1 or Phone 2 window

Dial Out Type

Enable Hot-Line and Warm-Line services. To achieve this, one sequence in the dial plan must start with a pause, with a 0 delay for a Hot Line, and a non-zero delay for a Warm Line.

Hot Line Number

Input the number for Hot Line function—This number will be called immediately when the telephone goes off-hook.

Phone 1 & Phone 2

58

Image 58

Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricityGeneral observations Typographical conventions used in this documentGeneral conventions Chapter contents General informationSmartLink 4020 overview SmartLinkSmartLink installation Installing the router Do the followingConnect to the Internet service provider Home System information System UptimeWAN IP Address System informationSystem Uptime LAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Status Network SettingsInterface Status Settings Obtain WAN conﬁguration dynamically Device Operating ModeInternet Conﬁguration Specify ﬁxed WAN conﬁgurationSettings Enable PPPoEAuthentication WAN PPPoE ConﬁgurationMAC Spooﬁng Conﬁguration Conﬁguring Dynamic DNSWAN MAC Address Spoofed WAN Vlan Conﬁguration MTU SizeSaving your work ToS/DiffServ QoS Quality of ServiceEnable Voice QoS Assured Bandwidth for VoiceIPSec Conﬁguration Outbound ESP Authentication Key HEX Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Inbound AH Authentication AlgorithmInbound ESP Authentication Key HEX Network-LAN Dhcp Static Address Assignment Server SettingsClient Network Information Viewing the Dchp Client TableStatic Routing RoutingDynamic Routing Viewing the Routing TableReserved Ports Port ForwardingIP Filtering Port Forwarding to LANFilter IP Range Telephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Subscribed for Voicemail Caller ID SettingUser Name Messages waitingGateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration Hook Flash Mime Type SIP Timer Values millisecondsSIP Parameters RTP ParametersNAT Traversal Packetization Audio/CODEC ConﬁgurationJitter Buffer Phone 1 & Phone FAX without T.38 Use G.711 faxSupplementary Service Activation User InformationSelective Call Forward Message Waiting IndicatorCall Forward All Three-Way ConferencingDial Out Type Call Forward Settings Selective Call Forward SettingsBlock Caller ID Http Digest SettingIncoming Call Block Outgoing Call BlockSpeed Dial Line 1 Speed Dial SettingsLine 2 Speed Dial Settings Speed Dial ServSystem System System New User Password Set Security PasswordNew Root Password Web Page ProtectConﬁguration Conﬁrm new passwordEnable Syslog LoggingDebug Connect Port Enable DebugDebug Server Saving your workEnable Ping Reply Service AccessEnable Http LocalizationPrompt Tone Call Progress TonesDial Tone Conﬁrm ToneRing Back Tone Distinctive Ring SettingBusy Tone Off Hook WarningSupplementary Service Keys Name ValueWarm Line Call forward selectiveBlock Anonymous Calls IP DialingIncome Caller ID Speed DialingCalling Preﬁx Keys Call Waiting call alternative Voicemail accessCall Hold Call ConferenceControl Timer Values Ring Setting FXS PortFXS Port Polarity Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp Community Conﬁguration Auto UpgradeRoutine Upgrade every xxx days Snmp System ConﬁgurationAuto Upgrade Protocol Manual UpgradeEnable Auto Upgrade Upgrade ServerReload Documentation Introduction Documentation linkLogout Logout window Logout Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Return for credit policy Out-of-warranty serviceReturns for credit RMA numbersAppendix a Compliance information Radio and TV Interference Safety ComplianceCompliance CE notice Declaration of ConformityAppendix B Speciﬁcations Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem SupportManagement Voice Services/FeaturesIP Services Operating EnvironmentAppendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF