Patton electronic 4020 Series manual Settings

Page 30

SmartLink 4020 Getting Started Guide

4 • Network—WAN

 

 

MAC address

The MAC address of the WAN Ethernet interface in the SmartLink.

Subnet Mask

The subnet mask is 32-bit number that filters a destination IP address to determine to which subnet it belongs. For example, a subnet mask of 255.255.0.0 for a network ID of 192.5.0.0 tells the switch to accept traffic des- tined for IP addresses that begin with 192.5—all other packets are ignored.

Default Gateway

The IP address of the gateway. The gateway IP address can be retrieved automatically in DHCP mode or be set up manually with a fixed IP address.

Domain name

The network domain name of the SmartLink.

DNS address

Refers to the address of your domain name server that was defined under WAN settings or that was learned dynamically through DHCP.

DynDNS address

The IP address of the dynamic DNS server that will be notified when the SmartLink 4020’s dynamic IP address changes.

VLAN

VLAN tag value encoded in the WAN Ethernet header in all outgoing packets

Priority Tag

Priority tag value encoded in the WAN Ethernet header in outgoing packets.

Settings

The Settings window contains the following sections:

Internet Configuration (see figure 6 on page 31)

WAN PPPoE Configuration (see figure 7 on page 32)

MAC Spoofing Configuration (see figure 9 on page 33)

MTU (see figure 10 on page 34)

Internet VLAN Configuration (see figure 9 on page 33)

Note After configuring the sections, click the Save Internet Settings button (see figure 5 on page 29) to save the new configuration.

Settings

30

Image 30
Contents SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables About this guide AudienceStructure Precautions Safety when working with electricityTypographical conventions used in this document General observationsGeneral conventions Chapter contents General informationSmartLink 4020 overview SmartLinkSmartLink installation Installing the router Do the followingConnect to the Internet service provider Home System information System UptimeWAN IP Address System informationSystem Uptime LAN IP AddressSystem Status Network-WAN WAN Priority Tag Ieee 802.1q Network Settings StatusInterface Status Settings Obtain WAN configuration dynamically Device Operating ModeInternet Configuration Specify fixed WAN configurationSettings Enable PPPoEAuthentication WAN PPPoE ConfigurationConfiguring Dynamic DNS MAC Spoofing ConfigurationWAN MAC Address Spoofed MTU Size WAN Vlan ConfigurationSaving your work ToS/DiffServ QoS Quality of ServiceEnable Voice QoS Assured Bandwidth for VoiceIPSec Configuration Outbound ESP Authentication Key HEX Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Inbound AH Authentication AlgorithmInbound ESP Authentication Key HEX Network-LAN Dhcp Static Address Assignment Server SettingsClient Network Information Viewing the Dchp Client TableStatic Routing RoutingDynamic Routing Viewing the Routing TableReserved Ports Port ForwardingIP Filtering Port Forwarding to LANFilter IP Range Telephony Telephony Telephony VoIP Status VoIP Server Registration StatusPhone Line Status Subscribed for Voicemail Caller ID SettingUser Name Messages waitingSIP Server Settings Gateway SettingsSIP Configuration SIP Extensions RTP Telephone Event ConfigurationVoIP Vlan Configuration Hook Flash Mime Type SIP Timer Values millisecondsSIP Parameters RTP ParametersNAT Traversal Audio/CODEC Configuration PacketizationJitter Buffer Phone 1 & Phone FAX without T.38 Use G.711 faxSupplementary Service Activation User InformationSelective Call Forward Message Waiting IndicatorCall Forward All Three-Way ConferencingDial Out Type Call Forward Settings Selective Call Forward SettingsBlock Caller ID Http Digest SettingIncoming Call Block Outgoing Call BlockSpeed Dial Line 1 Speed Dial SettingsLine 2 Speed Dial Settings Speed Dial ServSystem System System New User Password Set Security PasswordNew Root Password Web Page ProtectConfiguration Confirm new passwordEnable Syslog LoggingDebug Connect Port Enable DebugDebug Server Saving your workEnable Ping Reply Service AccessEnable Http LocalizationPrompt Tone Call Progress TonesDial Tone Confirm ToneRing Back Tone Distinctive Ring SettingBusy Tone Off Hook WarningSupplementary Service Keys Name ValueWarm Line Call forward selectiveBlock Anonymous Calls IP DialingSpeed Dialing Income Caller IDCalling Prefix Keys Call Waiting call alternative Voicemail accessCall Hold Call ConferenceControl Timer Values Ring Setting FXS PortSnmp Configuration FXS Port Polarity ConfigurationSnmp Trap Configuration Snmp Community Configuration Auto UpgradeRoutine Upgrade every xxx days Snmp System ConfigurationAuto Upgrade Protocol Manual UpgradeEnable Auto Upgrade Upgrade ServerReload Documentation Introduction Documentation linkLogout Logout window Logout Contacting Patton for assistance Warranty coverage Contact informationPatton support headquarters in the USA Return for credit policy Out-of-warranty serviceReturns for credit RMA numbersAppendix a Compliance information Radio and TV Interference Safety ComplianceCompliance CE notice Declaration of ConformityAppendix B Specifications Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem SupportManagement Voice Services/FeaturesIP Services Operating EnvironmentAppendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF