Q-Logic 9000 manual Preset Tab, Syslog Tab

Q

2 – Operations and Administration

2.2.2.1.1

Preset Tab

The Preset tab allows the user to quickly change log level settings for all software modules on the switch.

Figure 2-29. Log System Configurator: Preset Tab

To change the log level settings:

1.Click the On-Offcheckbox to the right of the setting(s).

2.Click the Apply button to save any changes.

2.2.2.1.2

Syslog Tab

Figure 2-30. Log System Configurator: Syslog Host Tab

The Syslog tab allows the user to configure logging messages to be sent to a syslog host. If the Host IP address is 0.0.0.0, no syslog host is configured, otherwise log messages are sent to the syslog server at a specified IP address and port.

To setup the syslog host:

D000003-006 Rev. A 2-19