Q-Logic 9000 manual Chassis Trap Control Screen

Q

2 – Operations and Administration

1.From the Chassis menu, click Chassis Traps.

2.Click Trap Control. The Chassis Trap Control screen is displayed:

Figure 2-58. Chassis Trap Control Screen

3. Select or deselect the desired trap(s).

NOTE: To generate an immediate trap, click the applicable Gen Trap button.

4.To save settings, click on Apply. Following are definitions for each chassis trap: Chassis Group

icsChassisTrapSystemSelfTestFailure

This trap indicates that the chassis failed one or more of its self-test(s). icsChassisTrapSystemReboot

This trap indicates that the chassis is in the process of rebooting. icsChassisTrapSystemMgmtSrvcStarted

This trap indicates that the internal service used to support the management of the chassis is operational.

icsChassisTrapSystemMgmtSrvcAborted

This trap indicates that the internal service used to support the management of the chassis has terminated abnormally.

icsChassisTrapSystemSwitchFailover

D000003-006 Rev. A 2-37