Q-Logic 9000 manual Time Service NTP Setup

Q

2 – Operations and Administration

1.Click the Use Network Time Protocol? checkbox.

2.Enter the IP address for the NTP server.

3.To save, click on Apply.

Figure 2-69. Time Service - NTP Setup

To manually set the system time:

1.Make sure the Use Network Time Protocol? checkbox is unchecked.

2.Set the current date and time using the drop-downs for Month, Day, and Year as well as Hour, Minute, Seconds, and AM/PM.

3.To save, click on Apply.

Figure 2-70. Time Service - Manual Setup

To set time zone and daylight saving time (DST) settings:

1.In the Time Zone drop-down, select the correct time zone based upon Greenwich Mean Time (GMT).

2.Using the Which, Day, and in Month drop-downs, set the start and end dates for daylight saving time.

D000003-006 Rev. A 2-49