2 – Operations and Administration Configuration and Monitoring Features
Q
1.Click on Port Stats.
2.Click on Set Field Thresholds. The Set Field Thresholds screen is displayed:
Figure 2-66. Set Field Thresholds Screen
3.To change a threshold value for any field:
a.Click in the Threshold field.
b.Enter a new threshold value.
NOTE: For those fields with a “Percent of Max” time unit, the user may enter a number from 0 to 100. For those fields with a “1 Second” time unit, the user may enter a number from 1 to 65,535.
c. Click Apply.
NOTE: If any threshold is exceeded on any port, the port will be displayed as red on the switch map and a warning message will be logged.
The following are descriptions for each field in the Set Field Thresholds area:
NOTE: The thresholds for the following four fields are set as a percentage of maximum; that is the percentage of maximum port capacity, which depending upon IB fabric configuration can be:
❥4X (10/20Gbps)
❥1X (2.5 Gbps)
|