Q
2 – Operations and Administration
2.2.7.3
Trap Control
The Trap Control screen allows the user to set default trap scenarios related to configuration files.
Figure 2-55. Trap Control
1.Click the chassis view.
2.Click Config File Admin.
3.Click Trap Control. The Trap Control screen is displayed:
Figure 2-56. Configuration File Trap Control Screen
4. Select or deselect the desired trap(s).
NOTE: To generate an immediate trap, click the applicable Gen Trap button.
5. To save settings, click on Apply.
NOTE: If the checkbox is not checked the Gen Trap button will not generate a trap.
Following are definitions for each configuration file trap: CfgSrvBackupFailed
The server was instructed to backup a file for a particular slot, which failed. CfgSrvSyncError
Synchronization to the slave CMU failed. The problem should be resolved and attempted manually.
|