Q-Logic 9000 manual Configure Syslog on the Syslog Server, Reset Log Levels

2 – Operations and Administration Configuration and Monitoring Features

Q

1.In the Host IP dialog box, enter the IP address of the syslog host where the log files are to be saved.

2.Click the Apply button to save the IP address.

2.2.2.1.3

Configure Syslog on the Syslog Server

1.Edit the /etc/sysconfig/syslog file and ensure that the -ris included in the SYSLOGD_OPTIONS. This allows logging from a remote system. For example:

SYSLOGD_OPTIONS="-r -m 0"

2.Type /etc/init.d/syslog restart, and press Enter.

NOTE: To centralize logging for all switches in an IB fabric, the user can configure each switch to point to the same syslog server, which has the syslog daemon (syslogd) running.

2.2.2.2

Reset Log Levels

The Reset Levels button resets the logging levels to their factory default values.

Figure 2-31. Reset Levels Button

To reset the logging levels:

1.From the menu, select Logging.

2.Click Logging.

3.Click Reset Levels. The Reset Levels window is displayed:

Figure 2-32. Reset Log Levels Window

2-20 D000003-006 Rev. A