Q-Logic 9000 manual Select Boot Image Button

2 – Operations and Administration Spine View Menu

Q

2.3.2

Select Boot Image

The Select Boot Image button allows the user to choose an alternative boot image for the switch. To select a boot image:

Figure 2-84. Select Boot Image Button

1.From the menu, select Maintenance.

2.Click Select Boot Image. The Boot Image Selection screen is displayed:

Figure 2-85. Boot Image Selection Screen

NOTE: By mousing over either radio button in the Boot Image Selection screen, the user can glean additional information about each file, as shown in Figure 2-86below:

Figure 2-86. Boot Image File Pop Up

To choose a new boot image:

2-60 D000003-006 Rev. A