Gigabit Uplink Web Smart Switch
■■ There is enough space in static MAC address table.
The static MAC address table is divided into several pages. At most 10 entries can be held in one page. The buttons “First”, “Previous” and “Next” can be used to browse the whole table.
Note:
■■ The capacity of the static MAC address is shown in “Appendix C”.
■■ If an incorrect port number is selected when adding an entry, or the port number is modified unexpectedly later, then the entries must be renewed; otherwise, the packets cannot be forwarded correctly.
■■ If a device, whose MAC address is added to static MAC address table, is connected to a wrong switch port (not the port configured in static MAC address entry\, all the packets routing to the device cannot reach the device.
■■ A MAC address cannot be added to static MAC address table and filtering MAC address table simultaneously.
66666666 Filtering MAC Address
All the packets taking the filtering MAC address as their destination are discarded by the switch no matter which port they enter from.
This page provides the function of adding, searching a filtering MAC address and changing the entry state. The filtering MAC address entry is applicable to all switch ports. The operating instruments, which are similar to “Static MAC Address”, are omitted here.
FFFFFFFFFFFFFiltering MAC Address
¾¾ Index: Indicates the entry index of filtering MAC address table.
¾¾ MAC Address: Indicates the filtering MAC address to be configured or to be searched.
¾¾ State: Indicates whether the entry is in enabled state or not.
Note: The capacity of filtering MAC address table is shown in “Appendix C”.
37 
Web Management