TP-Link TL-SL2428WEB/TL-SL2452WEB CCCCCCCCCCInstallation, Package Contents, Safety Precautions

Page 12

Gigabit Uplink Web Smart Switch

CCCCCCCCCCInstallation

2222 Package Contents

Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor.

One Gigabit Uplink Web Smart One AC Power Cord

Switch

This User Guide	Two Mounting Brackets and the
	Fittings

2222 Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe the following rules.

■■ Safety Precautions

■■	Keep the power off during the installation.
■■	Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good
	skin contact and is well grounded.
■■	Use only the power cord provided with the Switch.
■■	Make sure that the supply voltage matches the specifications indicated on the rear
	panel of the Switch.
■■	Ensure the vent hole is well ventilated and unblocked.
■■	Do not open or remove the cover of the Switch.
■■	Before cleaning the device, cut off the power supply. Do not clean it by the waterish
	cloth, and never use any other liquid cleaning method.

05 Installation

Image 12

Contents User Guide Page Copyright & Trademarks FCC Statement CE Mark WarningRelated Document About this User Guide Audience ConventionsContents WEB Management Features Cccccccccc IntroductionProduct Overview Appearance Front PanelReset Rear Panel CCCCCCCCCCInstallation Package ContentsSafety Precautions Site Requirements Lightening Protection Installation Tools Product InstallationFffffffffff Bracket Installation Cccccccccc Lightning Protection Cabling ReasonablyRequirements for Cabling Indoors Connect to Ground CCCCCCCCCCConnection Ethernet PortSFP Port Verify Installation Power OnCCCCCCCCCCFunction Description Flow Control Port SecurityPort Statistic and Port Status Storm ControlNetwork Setting Aging Time and Dynamic Address TableStatic MAC Address Table Filtering MAC Address TableDynamic Binding Vlan Setting Vlan ModePing Priority Setting Priority Mode Port TrunkingPort-Based Priority Port Default Priority 555555 802.1p PriorityPort Mirroring Virtual Cable TestConnecting to the Device Getting Started Ccccccccccweb ManagementOverview Fffffffffff Settings Dialog Dialog will pop up as below Login the Switch Setting the DeviceGigabit Uplink Web Smart Switch ¾¾ Port Trunking Port Trunking System Information Further explanation Port Setting Ffffffffffff Port Parameter 66666666Port Statistic Port Status 66666666Storm Control66666666Port Description Switch IP Address Static MAC AddressFFFFFFFFFFFFStatic MAC address Filtering MAC Address 66666666Dynamic Binding Bound MAC Address Aging Time Vlan Setting Vlan Mode 66666666Port Vlan Setting 66666666Tag Vlan Global Setting 66666666Tag Vlan Setting MTU Vlan Setting Priority Setting 66666666Port-Based Priority 66666666802.1p Priority Class FFFFFFFFFFFFVirtual Cable Test Appendix a Troubleshooting Qqqq Why does the Power LED work abnormally?Appendix B Table of Factory Defaults Pvid Appendix C Table of Function Differences of Switch Family Appendix D Hardware Specifications FCC, CEAppendix E Technical Support Page 7106503690 Rev