TP-Link TL-SL2428WEB/TL-SL2452WEB manual Switch IP Address, Static MAC Address

Page 42

Gigabit Uplink Web Smart Switch

666666 Network Setting

This page contains the following topics: switch IP address, static MAC address, filtering MAC address, dynamic binding, bound MAC address, aging time and ping.

66666666 Switch IP Address

This page is shown as below:

FFFFFFFFFFFFSwitch IP Address

¾¾ MAC Address: Is firmed into switch in the manufacturing process; it is sole and unchangeable.

¾¾ DHCP Client: Indicates whether the DHCP function is enabled. If DHCP client is enabled, the switch will obtain the IP address, netmask and default gateway from the DHCP server automatically; otherwise, these three items should be configured manually.

¾¾ IP Address: Is necessary for switch management. The configuration of switch IP address must be compliant with the subnet layout.

¾¾ Default Gateway: Serves as the default destination when a packet whose destination IP address is not within the switch’s subnet is to be forwarded.

Note:

■■ When DHCP client is enabled, the IP parameters are obtained automatically from the DHCP server, so the “IP Address”, “Netmask” and “Default Gateway” fields are disabled. These parameters can be queried on the DHCP server.

■■ The initial state of DHCP client is disabled and the initial IP address is 192.168.0.1.

66666666 Static MAC Address

This page provides the function of adding, searching a static MAC address and changing the entry state, as shown in Figure 6-28.

35 Web Management

Image 42

Contents User Guide Page Copyright & Trademarks FCC Statement CE Mark WarningRelated Document About this User Guide Audience ConventionsContents WEB Management Features Cccccccccc IntroductionProduct Overview Appearance Front PanelReset Rear Panel CCCCCCCCCCInstallation Package ContentsSafety Precautions Site Requirements Lightening Protection Installation Tools Product InstallationFffffffffff Bracket Installation Cccccccccc Lightning Protection Cabling ReasonablyRequirements for Cabling Indoors Connect to Ground CCCCCCCCCCConnection Ethernet PortSFP Port Verify Installation Power OnCCCCCCCCCCFunction Description Port Statistic and Port Status Flow ControlPort Security Storm ControlNetwork Setting Aging Time and Dynamic Address TableStatic MAC Address Table Filtering MAC Address TableDynamic Binding Vlan Setting Vlan ModePing Priority Setting Priority Mode Port TrunkingPort-Based Priority Port Mirroring Port Default Priority555555 802.1p Priority Virtual Cable TestConnecting to the Device Getting Started Ccccccccccweb ManagementOverview Fffffffffff Settings Dialog Dialog will pop up as below Login the Switch Setting the DeviceGigabit Uplink Web Smart Switch ¾¾ Port Trunking Port Trunking System Information Further explanation Port Setting Ffffffffffff Port Parameter 66666666Port Statistic Port Status 66666666Storm Control66666666Port Description Switch IP Address Static MAC AddressFFFFFFFFFFFFStatic MAC address Filtering MAC Address 66666666Dynamic Binding Bound MAC Address Aging Time Vlan Setting Vlan Mode 66666666Port Vlan Setting 66666666Tag Vlan Global Setting 66666666Tag Vlan Setting MTU Vlan Setting Priority Setting 66666666Port-Based Priority 66666666802.1p Priority Class FFFFFFFFFFFFVirtual Cable Test Appendix a Troubleshooting Qqqq Why does the Power LED work abnormally?Appendix B Table of Factory Defaults Pvid Appendix C Table of Function Differences of Switch Family Appendix D Hardware Specifications FCC, CEAppendix E Technical Support Page 7106503690 Rev