TP-Link TL-SL2210WEB/TL-SL2218WEB, TL-SL2428WEB/TL-SL2452WEB manual 66666666Tag Vlan Setting

Page 51

Gigabit Uplink Web Smart Switch

66666666Tag VLAN Setting

This page is displayed when the switch is in Tag VLAN mode and it contains the following fields. It configures each VLAN and is affected by the global setting of the ports.

FFFFFFFFFFFF Tag VLAN Setting

¾¾ VLAN: The VLAN number. Select the number of the VLAN you want to configure here.

¾¾ VLAN ID: Configure the VLAN ID.

¾¾ Port: The switch port number.

¾¾ Member: Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the current VLAN.

¾¾ Egress Frame: The solution to the egress frame. "Drop Tag" indicates drop the tag header before sending the frame. "Add Tag" indicates add the tag header before sending the frame. "Unmodify” indicates not to modify the tag header before sending the frame.

¾¾ Description: Displays the user-defined port description.

¾¾ All Ports: By operating on this field expediently, you can set the values of all ports in the corresponding field.

¾¾ All VLAN: Displays all defined Tag VLANs.

FFFFFFFFFFFFAll Tag VLAN

¾¾ Select All: Select all ports to be the VLAN member.

Web Management 44

Image 51

Contents User Guide Page CE Mark Warning Copyright & Trademarks FCC StatementRelated Document About this User Guide Conventions AudienceContents WEB Management Features Cccccccccc IntroductionProduct Overview Front Panel AppearanceReset Rear Panel CCCCCCCCCCInstallation Package ContentsSafety Precautions Site Requirements Lightening Protection Product Installation Installation ToolsFffffffffff Bracket Installation Cabling Reasonably Cccccccccc Lightning ProtectionRequirements for Cabling Indoors Connect to Ground CCCCCCCCCCConnection Ethernet PortSFP Port Power On Verify InstallationCCCCCCCCCCFunction Description Storm Control Flow ControlPort Security Port Statistic and Port StatusAging Time and Dynamic Address Table Network SettingStatic MAC Address Table Filtering MAC Address TableDynamic Binding Vlan Setting Vlan ModePing Priority Setting Priority Mode Port TrunkingPort-Based Priority Virtual Cable Test Port Default Priority555555 802.1p Priority Port MirroringConnecting to the Device Getting Started Ccccccccccweb ManagementOverview Fffffffffff Settings Dialog Dialog will pop up as below Setting the Device Login the SwitchGigabit Uplink Web Smart Switch ¾¾ Port Trunking Port Trunking System Information Further explanation Port Setting Ffffffffffff Port Parameter 66666666Port Statistic 66666666Storm Control Port Status66666666Port Description Static MAC Address Switch IP AddressFFFFFFFFFFFFStatic MAC address Filtering MAC Address 66666666Dynamic Binding Bound MAC Address Aging Time Vlan Setting Vlan Mode 66666666Port Vlan Setting 66666666Tag Vlan Global Setting 66666666Tag Vlan Setting MTU Vlan Setting Priority Setting 66666666Port-Based Priority 66666666802.1p Priority Class FFFFFFFFFFFFVirtual Cable Test Qqqq Why does the Power LED work abnormally? Appendix a TroubleshootingAppendix B Table of Factory Defaults Pvid Appendix C Table of Function Differences of Switch Family FCC, CE Appendix D Hardware SpecificationsAppendix E Technical Support Page 7106503690 Rev