TP-Link TL-SL2428WEB/TL-SL2452WEB, TL-SL2210WEB/TL-SL2218WEB manual Bound MAC Address

Page 46

Gigabit Uplink Web Smart Switch

¾¾ State: Indicates the switch port state that may be binding, free port, secure port, unplugged or "--". The details are shown below:

■■

■■

■■

■■

■■

Free Port: The binding function is disabled, and the port can learn MAC address freely.

Binding: The port is in binding state, and its bound MAC address number is still less than the max number.

Secure Port: The port has already bound the max number of MAC address in dynamic binding mode, or it was set to secure port manually in "Port Parameter" page.

Unplugged: The port is a SFP port and unplugged. The dynamic binding function cannot be configured now.

--:The port is a trunk member and its binding function cannot be configured.

Further explanation:

■■ If the port is set to secure port manually in "Port Parameter " page, the dynamic binding cannot be configured here. If the port with dynamic binding enabled transfers into secure state automatically because the port has bound the specified number MAC address, the dynamic binding function of the port can be enabled or disabled again.

■■ The combo box in "All Ports " entry is used to change the selections of corresponding combo boxes of all ports simultaneously.

■■ A "Refresh" button is provided to look up the latest number of bound MAC address.

Note: If the switch port is a trunk member or an unplugged SFP port, the binding function of the port cannot be configured here.

66666666 Bound MAC Address

This page is shown below:

FFFFFFFFFFFFBound MAC Address

¾¾ Index: Indicates the entry index in dynamic binding MAC address table.

¾¾ MAC Address: Indicates MAC addresses already bound to the switch ports.

¾¾ Port: Indicates the switch port number corresponding to the bound MAC address.

39 Web Management

Page 45 Page 47
Image 46
Page 45 Page 47
Contents User Guide Page Copyright & Trademarks FCC Statement CE Mark WarningRelated Document About this User Guide Audience ConventionsContents WEB Management Cccccccccc Introduction FeaturesProduct Overview Appearance Front PanelReset Rear Panel Package Contents CCCCCCCCCCInstallationSafety Precautions Site Requirements Lightening Protection Installation Tools Product InstallationFffffffffff Bracket Installation Cccccccccc Lightning Protection Cabling ReasonablyRequirements for Cabling Indoors Connect to Ground Ethernet Port CCCCCCCCCCConnectionSFP Port Verify Installation Power OnCCCCCCCCCCFunction Description Port Statistic and Port Status Flow ControlPort Security Storm ControlNetwork Setting Aging Time and Dynamic Address TableFiltering MAC Address Table Static MAC Address TableDynamic Binding Vlan Mode Vlan SettingPing Port Trunking Priority Setting Priority ModePort-Based Priority Port Mirroring Port Default Priority555555 802.1p Priority Virtual Cable TestCcccccccccweb Management Connecting to the Device Getting StartedOverview Fffffffffff Settings Dialog Dialog will pop up as below Login the Switch Setting the DeviceGigabit Uplink Web Smart Switch ¾¾ Port Trunking Port Trunking System Information Further explanation Port Setting Ffffffffffff Port Parameter 66666666Port Statistic Port Status 66666666Storm Control66666666Port Description Switch IP Address Static MAC AddressFFFFFFFFFFFFStatic MAC address Filtering MAC Address 66666666Dynamic Binding Bound MAC Address Aging Time Vlan Setting Vlan Mode 66666666Port Vlan Setting 66666666Tag Vlan Global Setting 66666666Tag Vlan Setting MTU Vlan Setting Priority Setting 66666666Port-Based Priority 66666666802.1p Priority Class FFFFFFFFFFFFVirtual Cable Test Appendix a Troubleshooting Qqqq Why does the Power LED work abnormally?Appendix B Table of Factory Defaults Pvid Appendix C Table of Function Differences of Switch Family Appendix D Hardware Specifications FCC, CEAppendix E Technical Support Page 7106503690 Rev
Top Page Image Contents