TP-Link TL-SL2210WEB/TL-SL2218WEB, TL-SL2428WEB/TL-SL2452WEB manual 66666666Dynamic Binding

Gigabit Uplink Web Smart Switch

66666666Dynamic Binding

This page provides the function of enabling or disabling dynamic binding.

If dynamic binding is disabled, the switch port learns MAC address unlimitedly (at most 8000 entries can be learned\.

A switch port with dynamic binding enabled can bind a specified number of MAC address. The MAC addresses bound by the switch port are always valid and won’t age. If the specified number is reached, the port stops binding and transfers into secure state.

The bound MAC addresses can be queried in the “Bound MAC Address“ page.

If the dynamic binding is disabled or the switch restarts, the bound MAC address entries are cleared.

There are 5 items in this page:

FFFFFFFFFFFFDynamic Binding

¾¾ Port: Indicates switch port number.

¾¾ Binding: Three options of dynamic binding are available. The details are shown below:

■■

■■

■■

Disable: Cause this port to learn MAC address freely.

Enable: Cause the port to bind MAC addresses until the specified number is reached.

--:This option is available only if the port is in a secure state, when this option is selected, the port state keeps unchanged.

¾¾ Number of MAC Address to Bind: Indicates the max number of MAC addresses that one switch port can bind.

¾¾ Number of Bound MAC Address: Indicates the number of MAC addresses that already bind to a switch port.

Web Management 38