KTI Networks KSD-800M manual IP Network Address Classification, Other QoS Settings

Page 28

3.1.3.4 IP Network Address Classification

User can configured two IP network address settings, IP(A) and IP(B). If a received IP packets source address or destination address belongs to the user defined IP network addresses. The packet is classified as high priority.

User Defined IP(A) Classification (Global)

Enable - Enable IP(A) checking

Disable - IP(A) classification is not applied.

User Defined IP(B) Classification (Global)

Enable - Enable IP(B) checking

Disable - IP(B) classification is not applied.

3.1.4 Other QoS Settings

802.1p High Priority Tag Setting for 802.1p classification

User Defined DSCP(A) Setting for DSCP classification

User Defined DSCP(B) Setting for DSCP classification

User Defined IP(A) Settings for IP network address classification

-IP(A) IP address setting

-IP(A) IP subnet mask setting

User Defined IP(B) Settings for IP network address classification

-IP(B) IP address setting

-IP(B) IP subnet mask setting

-28-

Image 28
Contents Installation Guide KSD-800MPage Trademarks Table of Contents Snmp Management Introduction Model series 10/100TX TP Ports 100FX fiber portsPlug and Play Auto Copper/Fiber ConnectionsFeatures Designed for Industrial ApplicationsBasic functions Management functionsProduct Panels Front Panel Network PortsLED Indicators FunctionSpecifications Top PanelLED Indicators Switch Functions10/100TX Twisted Pair Ports Port Configuration Control Function Software Management FunctionsVlan Function QoS FunctionDC Power Input Model DefinitionsMechanical EnvironmentalOptical Specifications Safety Cautions InstallationUnpacking DIN-Rail Mounting Panel Mounting Page Applying Power Using Terminal BlocksPower Failure Relay Output Using DC Power JackReset Button Making UTP ConnectionsFar End Fault Function Making Fiber ConnectionsLED Indication Function State InterpretationConfiguring IP Address for the Switch Configuring User Name and PasswordConfiguring Snmp Settings Configuring Port 7 and PortEgress Service Policy Advanced FunctionsQoS Function Priority LevelPort-based Priority Setting per port setting 3.2 802.1p Classification per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalOther QoS Settings IP Network Address ClassificationUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Function Vlan Operation2.1 802.1Q Tag Aware Vlan Mode global setting Ingress Member Filtering global settingUnmatched VID Filtering per port setting Ingress RulesEgress Tag Rule per port setting Vlan Group MappingPacket Forwarding under Vlan Egress Tagging RulesNull VID Replacement per port setting Summary of Vlan FunctionTelnet Management Interface Software ManagementMain Menu IP Settings Description IP MenuSnmp Settings Description Snmp MenuPort Config Status DescriptionAdministrator Vlan Settings AdministratorPort Setting Description Vlan Information Description Vlan IDVID Setting Description Vlan Global Settings DescriptionInput Description Per Port Settings Description Tagging with ingress Pvid for all packetsAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Restore Default Values Security ManagerUpdate Firmware Reboot SystemSetting Description ExitWeb Management Login to the Switch UnitStart Browser Software and Making Connection Page Port Status Menu Port Status DescriptionBasic Menu Menu FunctionSystem Settings Description IP Address IP Address Setting DescriptionSnmp Entries Community Settings Description Port Settings Description Trap Manager Settings DescriptionPort Controls Vlan Controls Vlan Group Configuration Global Settings DescriptionIngress Rules Group Settings Description Per Port Settings Egress Rules Insertion for untagged packets only is selectedQoS Per Port Settings Description QoS ControlsQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Settings Description Image Refresh TimeRestore Default Snmp Management MIB ObjectsSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings