KTI Networks KSD-800M Port Controls, Trap Manager Settings Description, Port Settings Description

Page 52

Trap Manager Settings	Description

IP Address	Specify the IP address of the trap manager to which the switch will
	send Snmp traps when predefined events occur.
Community	Community string used together with the trap messages sent to the
	trap manager
<<Add>>	Button to add a new trap manager (specified by an IP and Commu-
	nity) into manager list
Remove	Button to remove the trap manager
Enable Link Change Trap	Button to enable the switch to send a trap when any port link
	changes
Enable Login Failure Trap	Button to enable the switch to send a trap when any login failure is
	detected

5.4.2 Port Controls

Port Settings	Description

Port	Specify the ports for the new settings.
	More than one port can be configured at the same time. Use <Shift> key
	and <Ctrl> key to specify multiple ports.
Port Function	Enable port transmission function, options:
	N - unchanged
	Enable - enable the port function
	Disable - disable the port function
Auto Negotiation	Enable auto negotiation function, options:
	Null - unchanged
	Enable - enable the port auto-negotiation function
	Disable - disable the port auto-negotiation function and use forced mode

-52-

Image 52

Contents Installation Guide KSD-800MPage Trademarks Table of Contents Snmp Management Introduction Model series 10/100TX TP Ports 100FX fiber portsPlug and Play Auto Copper/Fiber ConnectionsFeatures Designed for Industrial ApplicationsBasic functions Management functionsProduct Panels Front Panel Network PortsLED Indicators FunctionSpecifications Top PanelLED Indicators Switch Functions10/100TX Twisted Pair Ports Port Configuration Control Function Software Management FunctionsVlan Function QoS FunctionDC Power Input Model DefinitionsMechanical EnvironmentalOptical Specifications Safety Cautions InstallationUnpacking DIN-Rail Mounting Panel Mounting Page Applying Power Using Terminal BlocksPower Failure Relay Output Using DC Power JackReset Button Making UTP ConnectionsFar End Fault Function Making Fiber ConnectionsLED Indication Function State InterpretationConfiguring IP Address for the Switch Configuring User Name and PasswordConfiguring Snmp Settings Configuring Port 7 and PortEgress Service Policy Advanced FunctionsQoS Function Priority LevelPort-based Priority Setting per port setting 3.2 802.1p Classification per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalOther QoS Settings IP Network Address ClassificationUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Function Vlan Operation2.1 802.1Q Tag Aware Vlan Mode global setting Ingress Member Filtering global settingUnmatched VID Filtering per port setting Ingress RulesEgress Tag Rule per port setting Vlan Group MappingPacket Forwarding under Vlan Egress Tagging RulesNull VID Replacement per port setting Summary of Vlan FunctionTelnet Management Interface Software ManagementMain Menu IP Settings Description IP MenuSnmp Settings Description Snmp MenuPort Config Status DescriptionAdministrator Vlan Settings AdministratorPort Setting Description Vlan Information Description Vlan IDVID Setting Description Vlan Global Settings DescriptionInput Description Per Port Settings Description Tagging with ingress Pvid for all packetsAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Restore Default Values Security ManagerUpdate Firmware Reboot SystemSetting Description ExitWeb Management Login to the Switch UnitStart Browser Software and Making Connection Page Port Status Menu Port Status DescriptionBasic Menu Menu FunctionSystem Settings Description IP Address IP Address Setting DescriptionSnmp Entries Community Settings Description Port Settings Description Trap Manager Settings DescriptionPort Controls Vlan Controls Vlan Group Configuration Global Settings DescriptionIngress Rules Group Settings Description Per Port Settings Egress Rules Insertion for untagged packets only is selectedQoS Per Port Settings Description QoS ControlsQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Settings Description Image Refresh TimeRestore Default Snmp Management MIB ObjectsSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings