KTI Networks KSD-800M manual Trademarks

Page 3

The information contained in this document is subject to change without prior notice. Copyright (C). All Rights Reserved.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense.

NOTICE:

(1)The changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.

(2)Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European Community and meets or exceeds the following technical standard.

EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. This device complies with CISPR Class A.

WARNING: This is a Class A product. In a domestic environment this product may cause radio interfer- ence in which case the user may be required to take adequate measures.

CE NOTICE

Marking by the symbol indicates compliance of this equipment to the EMC directive of the Euro-

pean Community. Such marking is indicative that this equipment meets or exceeds the following techni- cal standards:

EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information Technology Equipment.

EN 50082/1:Generic Immunity Standard -Part 1: Domestic Commercial and Light Industry.

EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical

equipment - Part 2: Harmonics.

Image 3

Contents KSD-800M Installation GuidePage Trademarks Table of Contents Snmp Management Auto Copper/Fiber Connections IntroductionModel series 10/100TX TP Ports 100FX fiber ports Plug and PlayManagement functions FeaturesDesigned for Industrial Applications Basic functionsProduct Panels Network Ports Front PanelFunction LED IndicatorsTop Panel SpecificationsSwitch Functions LED Indicators10/100TX Twisted Pair Ports QoS Function Port Configuration Control FunctionSoftware Management Functions Vlan FunctionEnvironmental DC Power InputModel Definitions MechanicalOptical Specifications Installation Safety CautionsUnpacking DIN-Rail Mounting Panel Mounting Page Using Terminal Blocks Applying PowerUsing DC Power Jack Power Failure Relay OutputMaking UTP Connections Reset ButtonMaking Fiber Connections Far End Fault FunctionFunction State Interpretation LED IndicationConfiguring Port 7 and Port Configuring IP Address for the SwitchConfiguring User Name and Password Configuring Snmp SettingsPriority Level Egress Service PolicyAdvanced Functions QoS FunctionUser Defined Dscpa Classification Global Port-based Priority Setting per port setting3.2 802.1p Classification per port setting Dscp Classification per port settingUser Defined IPB Classification Global Other QoS SettingsIP Network Address Classification User Defined IPA Classification GlobalVlan Operation Vlan FunctionIngress Rules 2.1 802.1Q Tag Aware Vlan Mode global settingIngress Member Filtering global setting Unmatched VID Filtering per port settingEgress Tagging Rules Egress Tag Rule per port settingVlan Group Mapping Packet Forwarding under VlanSummary of Vlan Function Null VID Replacement per port settingSoftware Management Telnet Management InterfaceMain Menu IP Menu IP Settings DescriptionSnmp Menu Snmp Settings DescriptionStatus Description Port ConfigAdministrator Administrator Vlan SettingsPort Setting Description Vlan ID Vlan Information DescriptionVlan Global Settings Description VID Setting DescriptionInput Description Tagging with ingress Pvid for all packets Per Port Settings DescriptionAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Security Manager Restore Default ValuesExit Update FirmwareReboot System Setting DescriptionLogin to the Switch Unit Web ManagementStart Browser Software and Making Connection Page Port Status Description Port Status MenuMenu Function Basic MenuIP Address IP Address Setting Description System Settings DescriptionSnmp Entries Community Settings Description Trap Manager Settings Description Port Settings DescriptionPort Controls Vlan Controls Global Settings Description Vlan Group ConfigurationIngress Rules Group Settings Description Per Port Settings Insertion for untagged packets only is selected Egress RulesQoS Controls QoS Per Port Settings DescriptionQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Image Refresh Time Settings DescriptionRestore Default Objects Snmp ManagementMIB Objects Snmp TrapsAppendix. Factory Default Settings QoS Settings