KTI Networks KSD-800M manual IPA address and IPA subnet mask specify IPA user defined

Page 60

	IP(A) address and IP(A) subnet mask specify IP(A) user defined
	IP network address for IP packet classification.
Specific IP & Mask (B)	If a received IP packet’s source address or destination address
	belongs to the user defined IP network addresses. The packet is
	classified as high priority.
	Enable - Enable user defined IP(B) network address checking
	Disable - IP(B) classification is not applied.
Specific IP Address (B)	Enter user defined IP(B) address for classification.
Specific Mask (B)	Enter user defined IP(B) subnet mask for classification.
	IP(B) address and IP(B) subnet mask specify IP(B) user defined
	IP network address for IP packet classification.
Apply	Button to confirm the settings

A received packet on an ingress port is classified as high priority if it meets one the following classifi- cations:

1.The ingress port is enabled for port based high priority.

2.The ingress port is enabled for 802.1p classification and the packet is 802.1Q tagged with a tag value equal to or higher than 802.1p high priority tag threshold setting.

3.The ingress port is enabled for Default TOS/DS classification and the packet is an IP packet with DSCP value <101110>, <001010>, <010010>, <011010>, <100010>, <111000> or <110000>.

4.Specific DSCP(A) classification is enabled and the packet is an IP packet with DSCP value matched Specific DSCP(A) setting.

5.Specific DSCP(B) classification is enabled and the packet is an IP packet with DSCP value matched Specific DSCP(B) setting.

6.Specific IP & Mask (A) classification is enabled and the packet is an IP packet whose source or destination address belong to the network address specified by Specific IP & Mask (A) settings.

7.Specific IP & Mask (B) classification is enabled and the packet is an IP packet whose source or destination address belong to the network address specified by Specific IP & Mask (B) settings.

If none of above classifications is matched, the received packet is classified as low priority. It is suggested to enable those classifications which are required for your application only and disable the rest.

-60-

Image 60

Contents Installation Guide KSD-800MPage Trademarks Table of Contents Snmp Management Introduction Model series 10/100TX TP Ports 100FX fiber portsPlug and Play Auto Copper/Fiber ConnectionsFeatures Designed for Industrial ApplicationsBasic functions Management functionsProduct Panels Front Panel Network PortsLED Indicators FunctionSpecifications Top PanelSwitch Functions LED Indicators10/100TX Twisted Pair Ports Port Configuration Control Function Software Management FunctionsVlan Function QoS FunctionDC Power Input Model DefinitionsMechanical EnvironmentalOptical Specifications Installation Safety CautionsUnpacking DIN-Rail Mounting Panel Mounting Page Applying Power Using Terminal BlocksPower Failure Relay Output Using DC Power JackReset Button Making UTP ConnectionsFar End Fault Function Making Fiber ConnectionsLED Indication Function State InterpretationConfiguring IP Address for the Switch Configuring User Name and PasswordConfiguring Snmp Settings Configuring Port 7 and PortEgress Service Policy Advanced FunctionsQoS Function Priority LevelPort-based Priority Setting per port setting 3.2 802.1p Classification per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalOther QoS Settings IP Network Address ClassificationUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Function Vlan Operation2.1 802.1Q Tag Aware Vlan Mode global setting Ingress Member Filtering global settingUnmatched VID Filtering per port setting Ingress RulesEgress Tag Rule per port setting Vlan Group MappingPacket Forwarding under Vlan Egress Tagging RulesNull VID Replacement per port setting Summary of Vlan FunctionSoftware Management Telnet Management InterfaceMain Menu IP Settings Description IP MenuSnmp Settings Description Snmp MenuPort Config Status DescriptionAdministrator Administrator Vlan SettingsPort Setting Description Vlan Information Description Vlan IDVlan Global Settings Description VID Setting DescriptionInput Description Per Port Settings Description Tagging with ingress Pvid for all packetsAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Restore Default Values Security ManagerUpdate Firmware Reboot SystemSetting Description ExitLogin to the Switch Unit Web ManagementStart Browser Software and Making Connection Page Port Status Menu Port Status DescriptionBasic Menu Menu FunctionIP Address IP Address Setting Description System Settings DescriptionSnmp Entries Community Settings Description Trap Manager Settings Description Port Settings DescriptionPort Controls Vlan Controls Global Settings Description Vlan Group ConfigurationIngress Rules Group Settings Description Per Port Settings Egress Rules Insertion for untagged packets only is selectedQoS Per Port Settings Description QoS ControlsQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Settings Description Image Refresh TimeRestore Default Snmp Management MIB ObjectsSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings