KTI Networks KSD-800M manual Update Firmware, Reboot System, Exit, Setting Description

Page 45

4.8 Update Firmware

Select [7] Update Firmware to update the firmware of the switch. A new firmware may be released by the factory due to function enhancement. The update method is via TFTP protocol.

The steps are:

1.A TFTP server must be available in the network before updating the firmware.

2.Place the new firmware on the TFTP server with filename [image.bin].

3.Use [7] Update firmware to specify the IP address of the TFTP server and start downloading of the new firmware as follows:

Enter Esc to abort..

Please Input TFTP Server IP Address(xxx.xxx.xxx.xxx):yyy.yyy.yyy.yyy TFTP Server :yyy.yyy.yyy.yyy

Do you want to start download new image? (Y/N)

Setting	Description

TFTP IP Address	IP address of the TFTP server from where a new firmware is down-
	loaded.

4.9 Reboot System

Select [7] Reboot System to reboot the switch.

Do you want to reboot system ?(Y/N):y

Start rebooting.....

Press [Y] to confirm to reboot the switch with current configuration settings. Note that the current telnet connection will be disconnected after confirmation.

You must restart your telnet and login into the switch again.

4.10 Exit

Select [Q] Exit to stop telnet connection with the switch.

-45-

Image 45

Contents KSD-800M Installation GuidePage Trademarks Table of Contents Snmp Management Model series 10/100TX TP Ports 100FX fiber ports IntroductionPlug and Play Auto Copper/Fiber ConnectionsDesigned for Industrial Applications FeaturesBasic functions Management functionsProduct Panels Network Ports Front PanelFunction LED IndicatorsTop Panel SpecificationsSwitch Functions LED Indicators10/100TX Twisted Pair Ports Software Management Functions Port Configuration Control FunctionVlan Function QoS FunctionModel Definitions DC Power InputMechanical EnvironmentalOptical Specifications Installation Safety CautionsUnpacking DIN-Rail Mounting Panel Mounting Page Using Terminal Blocks Applying PowerUsing DC Power Jack Power Failure Relay OutputMaking UTP Connections Reset ButtonMaking Fiber Connections Far End Fault FunctionFunction State Interpretation LED IndicationConfiguring User Name and Password Configuring IP Address for the SwitchConfiguring Snmp Settings Configuring Port 7 and PortAdvanced Functions Egress Service PolicyQoS Function Priority Level3.2 802.1p Classification per port setting Port-based Priority Setting per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalIP Network Address Classification Other QoS SettingsUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Operation Vlan FunctionIngress Member Filtering global setting 2.1 802.1Q Tag Aware Vlan Mode global settingUnmatched VID Filtering per port setting Ingress RulesVlan Group Mapping Egress Tag Rule per port settingPacket Forwarding under Vlan Egress Tagging RulesSummary of Vlan Function Null VID Replacement per port settingSoftware Management Telnet Management InterfaceMain Menu IP Menu IP Settings DescriptionSnmp Menu Snmp Settings DescriptionStatus Description Port ConfigAdministrator Administrator Vlan SettingsPort Setting Description Vlan ID Vlan Information DescriptionVlan Global Settings Description VID Setting DescriptionInput Description Tagging with ingress Pvid for all packets Per Port Settings DescriptionAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Security Manager Restore Default ValuesReboot System Update FirmwareSetting Description ExitLogin to the Switch Unit Web ManagementStart Browser Software and Making Connection Page Port Status Description Port Status MenuMenu Function Basic MenuIP Address IP Address Setting Description System Settings DescriptionSnmp Entries Community Settings Description Trap Manager Settings Description Port Settings DescriptionPort Controls Vlan Controls Global Settings Description Vlan Group ConfigurationIngress Rules Group Settings Description Per Port Settings Insertion for untagged packets only is selected Egress RulesQoS Controls QoS Per Port Settings DescriptionQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Image Refresh Time Settings DescriptionRestore Default MIB Objects Snmp ManagementSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings