KTI Networks KSD-800M Configuring IP Address for the Switch, Configuring User Name and Password

Page 25

2.11 Configuring IP Address for the Switch

The switch is shipped with the following factory default settings for software management :

Default IP address of the switch : 192.168.0.2 / 255.255.255.0

The IP Address is an identification of the switch in a TCP/IP network. Each switch should be desig- nated a new and unique IP address in the network. Refer to Telnet management interface.

To change the default IP address Use Telnet IP menu.

2.12 Configuring User Name and Password

The switch is shipped with the following factory default settings for software management :

•User name : admin

•Password : 123

The user name and password are used for authentication in accessing to the switch via Telnet interface and Http web-based interface. For security reason, it is recommended to change the default settings for the switch before deploying it to your network. Refer to Telnet management interface.

To change user name and password Use Telnet Security Manager menu

2.13 Configuring SNMP Settings

The switch is shipped with the following factory default settings for SNMP software management :

Community strings : public with access right - read only

The community strings are used for authentication in accessing to the switch via SNMP protocol. For security reason, it is recommended to change the default settings for the switch before deploying it to your network. Refer to Telnet management interface.

To change Community strings Use Telnet SNMP menu

2.14 Configuring Port 7 and Port 8

If a 100FX is provided on Port 7 or Port 8 and 100FX fiber connection is selected, configure the port to auto-negotiation disabled, 100M, and full duplex. Refer to Telnet management interface.

To change port configuration Use Telnet Port Config menu

-25-

Image 25

Contents KSD-800M Installation GuidePage Trademarks Table of Contents Snmp Management Model series 10/100TX TP Ports 100FX fiber ports IntroductionPlug and Play Auto Copper/Fiber ConnectionsDesigned for Industrial Applications FeaturesBasic functions Management functionsProduct Panels Network Ports Front PanelFunction LED IndicatorsTop Panel SpecificationsLED Indicators Switch Functions10/100TX Twisted Pair Ports Software Management Functions Port Configuration Control FunctionVlan Function QoS FunctionModel Definitions DC Power InputMechanical EnvironmentalOptical Specifications Safety Cautions InstallationUnpacking DIN-Rail Mounting Panel Mounting Page Using Terminal Blocks Applying PowerUsing DC Power Jack Power Failure Relay OutputMaking UTP Connections Reset ButtonMaking Fiber Connections Far End Fault FunctionFunction State Interpretation LED IndicationConfiguring User Name and Password Configuring IP Address for the SwitchConfiguring Snmp Settings Configuring Port 7 and PortAdvanced Functions Egress Service PolicyQoS Function Priority Level3.2 802.1p Classification per port setting Port-based Priority Setting per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalIP Network Address Classification Other QoS SettingsUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Operation Vlan FunctionIngress Member Filtering global setting 2.1 802.1Q Tag Aware Vlan Mode global settingUnmatched VID Filtering per port setting Ingress RulesVlan Group Mapping Egress Tag Rule per port settingPacket Forwarding under Vlan Egress Tagging RulesSummary of Vlan Function Null VID Replacement per port settingTelnet Management Interface Software ManagementMain Menu IP Menu IP Settings DescriptionSnmp Menu Snmp Settings DescriptionStatus Description Port ConfigAdministrator Vlan Settings AdministratorPort Setting Description Vlan ID Vlan Information DescriptionVID Setting Description Vlan Global Settings DescriptionInput Description Tagging with ingress Pvid for all packets Per Port Settings DescriptionAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Security Manager Restore Default ValuesReboot System Update FirmwareSetting Description ExitWeb Management Login to the Switch UnitStart Browser Software and Making Connection Page Port Status Description Port Status MenuMenu Function Basic MenuSystem Settings Description IP Address IP Address Setting DescriptionSnmp Entries Community Settings Description Port Settings Description Trap Manager Settings DescriptionPort Controls Vlan Controls Vlan Group Configuration Global Settings DescriptionIngress Rules Group Settings Description Per Port Settings Insertion for untagged packets only is selected Egress RulesQoS Controls QoS Per Port Settings DescriptionQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Image Refresh Time Settings DescriptionRestore Default MIB Objects Snmp ManagementSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings