KTI Networks KSD-800M manual Vlan Global Settings Description, Input Description

Page 39

VLAN Global Settings

Description

 

 

802.1Q Tag Aware Mode Enable - Under this mode, the switch will check the content of every received packets. For 802.1Q tagged packets, the tagged VID on the packet is used to look up the VLAN group table and find the group whose VID matches the packet tagged VID.

Disable - Under this mode, the switch does not check the contents of the received packets. The default VLAN group indexed by the ingress port is used directly for further VLAN operation.

Ingress Member Filtering Mode Enable - Drop packet if the ingress port is not the member port of the VLAN group

Disable - No ingress member filtering is applied

Select [4] VLAN Group Member Settings to configure member ports for VLAN groups.

Input

Description

 

 

Groups

Specify group list to be configured. More than one group can be configured at the same

 

time. Examples:

 

123 - Group 1, Group 2, Group 3

 

1 2 3 - Group 1, Group 2, Group 3

 

1,2,3 - Group 1, Group 2, Group 3

Ports

Enter port list for the selected groups

 

Examples:

 

123 - Port 1, Port 2, Port 3

 

1 2 3 - Port 1, Port 2, Port 3

 

1,2,3 - Port 1, Port 2, Port 3

 

 

Select [5] VLAN Group VID Settings to configure VLAN ID for VLAN groups.

VID Setting

Description

 

 

Groups

Select group list to be configured.

VLAN ID

Enter VLAN ID for the selected groups

 

Valid values : 1 - 4095

 

 

-39-

Image 39
Contents KSD-800M Installation GuidePage Trademarks Table of Contents Snmp Management Auto Copper/Fiber Connections IntroductionModel series 10/100TX TP Ports 100FX fiber ports Plug and PlayManagement functions FeaturesDesigned for Industrial Applications Basic functionsProduct Panels Network Ports Front PanelFunction LED IndicatorsTop Panel SpecificationsSwitch Functions LED Indicators10/100TX Twisted Pair Ports QoS Function Port Configuration Control FunctionSoftware Management Functions Vlan FunctionEnvironmental DC Power InputModel Definitions MechanicalOptical Specifications Installation Safety CautionsUnpacking DIN-Rail Mounting Panel Mounting Page Using Terminal Blocks Applying PowerUsing DC Power Jack Power Failure Relay OutputMaking UTP Connections Reset ButtonMaking Fiber Connections Far End Fault FunctionFunction State Interpretation LED IndicationConfiguring Port 7 and Port Configuring IP Address for the SwitchConfiguring User Name and Password Configuring Snmp SettingsPriority Level Egress Service PolicyAdvanced Functions QoS FunctionUser Defined Dscpa Classification Global Port-based Priority Setting per port setting3.2 802.1p Classification per port setting Dscp Classification per port settingUser Defined IPB Classification Global Other QoS SettingsIP Network Address Classification User Defined IPA Classification GlobalVlan Operation Vlan FunctionIngress Rules 2.1 802.1Q Tag Aware Vlan Mode global settingIngress Member Filtering global setting Unmatched VID Filtering per port settingEgress Tagging Rules Egress Tag Rule per port settingVlan Group Mapping Packet Forwarding under VlanSummary of Vlan Function Null VID Replacement per port settingSoftware Management Telnet Management InterfaceMain Menu IP Menu IP Settings DescriptionSnmp Menu Snmp Settings DescriptionStatus Description Port ConfigAdministrator Administrator Vlan SettingsPort Setting Description Vlan ID Vlan Information DescriptionVlan Global Settings Description VID Setting DescriptionInput Description Tagging with ingress Pvid for all packets Per Port Settings DescriptionAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Security Manager Restore Default ValuesExit Update FirmwareReboot System Setting DescriptionLogin to the Switch Unit Web ManagementStart Browser Software and Making Connection Page Port Status Description Port Status MenuMenu Function Basic MenuIP Address IP Address Setting Description System Settings DescriptionSnmp Entries Community Settings Description Trap Manager Settings Description Port Settings DescriptionPort Controls Vlan Controls Global Settings Description Vlan Group ConfigurationIngress Rules Group Settings Description Per Port Settings Insertion for untagged packets only is selected Egress RulesQoS Controls QoS Per Port Settings DescriptionQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Image Refresh Time Settings DescriptionRestore Default Objects Snmp ManagementMIB Objects Snmp TrapsAppendix. Factory Default Settings QoS Settings