KTI Networks KSD-800M manual IP Menu, IP Settings Description

Page 34

4.2 IP Menu

Select [1] IP Menu to configure IP protocol related settings for the switch.

IP Menu:

[0]Print this menu

[1]Set IP Address

[2]View IP status [Q] Back Menu

Please Select(0-3)....

INET>1

Enter Esc to abort..

Please Input IP Address(xxx.xxx.xxx.xxx):192.168.0.232 replacing net[0] IP address192.168.0.232 with 192.168.0.232 Please Input Subnet Mask(xxx.xxx.xxx.xxx):255.255.255.0 replacing subnet mask[0]255.255.255.0 with 255.255.255.0 Please Input Gateway IP(xxx.xxx.xxx.xxx):192.168.0.1 replacing gatewqy IP addr[0] 192.168.0.1 with 192.168.0.1 Do you want to Change IP setting?(Y/N):

IP Settings	Description

IP Address : IP address assigned to the switch

Subnet Mask : IP subnet mask of the switch

Gateway IP : IP address of the default gateway of the switch

To view current IP settings of the switch, select [2] View IP status.

IP Menu:

[0]Print this menu

[1]Set IP Address

[2]View IP status [Q] Back Menu

Please Select(0-3)....

INET> 2

IP Addr: 192.168.0.232 Submask: 255.255.255.0 Gateway: 192.168.0.1

INET>

-34-

Image 34

Contents Installation Guide KSD-800MPage Trademarks Table of Contents Snmp Management Plug and Play IntroductionModel series 10/100TX TP Ports 100FX fiber ports Auto Copper/Fiber ConnectionsBasic functions FeaturesDesigned for Industrial Applications Management functionsProduct Panels Front Panel Network PortsLED Indicators FunctionSpecifications Top PanelLED Indicators Switch Functions10/100TX Twisted Pair Ports Vlan Function Port Configuration Control FunctionSoftware Management Functions QoS FunctionMechanical DC Power InputModel Definitions EnvironmentalOptical Specifications Safety Cautions InstallationUnpacking DIN-Rail Mounting Panel Mounting Page Applying Power Using Terminal BlocksPower Failure Relay Output Using DC Power JackReset Button Making UTP ConnectionsFar End Fault Function Making Fiber ConnectionsLED Indication Function State InterpretationConfiguring Snmp Settings Configuring IP Address for the SwitchConfiguring User Name and Password Configuring Port 7 and PortQoS Function Egress Service PolicyAdvanced Functions Priority LevelDscp Classification per port setting Port-based Priority Setting per port setting3.2 802.1p Classification per port setting User Defined Dscpa Classification GlobalUser Defined IPA Classification Global Other QoS SettingsIP Network Address Classification User Defined IPB Classification GlobalVlan Function Vlan OperationUnmatched VID Filtering per port setting 2.1 802.1Q Tag Aware Vlan Mode global settingIngress Member Filtering global setting Ingress RulesPacket Forwarding under Vlan Egress Tag Rule per port settingVlan Group Mapping Egress Tagging RulesNull VID Replacement per port setting Summary of Vlan FunctionTelnet Management Interface Software ManagementMain Menu IP Settings Description IP MenuSnmp Settings Description Snmp MenuPort Config Status DescriptionAdministrator Vlan Settings AdministratorPort Setting Description Vlan Information Description Vlan IDVID Setting Description Vlan Global Settings DescriptionInput Description Per Port Settings Description Tagging with ingress Pvid for all packetsAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Restore Default Values Security ManagerSetting Description Update FirmwareReboot System ExitWeb Management Login to the Switch UnitStart Browser Software and Making Connection Page Port Status Menu Port Status DescriptionBasic Menu Menu FunctionSystem Settings Description IP Address IP Address Setting DescriptionSnmp Entries Community Settings Description Port Settings Description Trap Manager Settings DescriptionPort Controls Vlan Controls Vlan Group Configuration Global Settings DescriptionIngress Rules Group Settings Description Per Port Settings Egress Rules Insertion for untagged packets only is selectedQoS Per Port Settings Description QoS ControlsQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Settings Description Image Refresh TimeRestore Default Snmp Traps Snmp ManagementMIB Objects ObjectsAppendix. Factory Default Settings QoS Settings