KTI Networks KSD-800M manual Software Management, Telnet Management Interface, Main Menu

Page 33

4. Software Management

The switch provides the following in-band management interfaces for configuring the switch to meet requirements for different applications:

•Telnet over TCP/IP

•Http web-based over TCP/IP

•SNMP over TCP/IP

4.1 Telnet Management Interface

Use Telnet software to perform the management operation. The most convenient solution is using the built-in Telnet function in your Windows PC. Execute Telnet command as follows:

>telnet xxx.xxx.xxx.xxx

The specified xxx.xxx.xxx.xxx is the IP address of the switch. Factory default IP address is 192.168.0.2.

A welcome message and login prompt are displayed if the connection is established properly.

Welcome to Telnet Server

login:xxxxx password: xxx Welcome xxxxx

Factory default login name : admin

Factory default password : 123

It is suggested to change the user name and password first before performing other configuration. To change the user name and password, select [6] Security Manager for configuration.

Main Menu

INET>

Setup Menu

TCP/IP stack v1.0

[0]Print this menu

[1]IP Menu

[2]SNMP Menu

[3]Port Config

[4]Administrator

[5]Restore Default Values

[6]Security Manager

[7]Update firmware

[8]Reboot System

[Q] Exit

Please Select(0-9)....

Note: If [Unchange] option is provided during configuration, it means keeping current setting.

-33-

Image 33

Contents KSD-800M Installation GuidePage Trademarks Table of Contents Snmp Management Model series 10/100TX TP Ports 100FX fiber ports IntroductionPlug and Play Auto Copper/Fiber ConnectionsDesigned for Industrial Applications FeaturesBasic functions Management functionsProduct Panels Network Ports Front PanelFunction LED IndicatorsTop Panel SpecificationsSwitch Functions LED Indicators10/100TX Twisted Pair Ports Software Management Functions Port Configuration Control FunctionVlan Function QoS FunctionModel Definitions DC Power InputMechanical EnvironmentalOptical Specifications Installation Safety CautionsUnpacking DIN-Rail Mounting Panel Mounting Page Using Terminal Blocks Applying PowerUsing DC Power Jack Power Failure Relay OutputMaking UTP Connections Reset ButtonMaking Fiber Connections Far End Fault FunctionFunction State Interpretation LED IndicationConfiguring User Name and Password Configuring IP Address for the SwitchConfiguring Snmp Settings Configuring Port 7 and PortAdvanced Functions Egress Service PolicyQoS Function Priority Level3.2 802.1p Classification per port setting Port-based Priority Setting per port settingDscp Classification per port setting User Defined Dscpa Classification GlobalIP Network Address Classification Other QoS SettingsUser Defined IPA Classification Global User Defined IPB Classification GlobalVlan Operation Vlan FunctionIngress Member Filtering global setting 2.1 802.1Q Tag Aware Vlan Mode global settingUnmatched VID Filtering per port setting Ingress RulesVlan Group Mapping Egress Tag Rule per port settingPacket Forwarding under Vlan Egress Tagging RulesSummary of Vlan Function Null VID Replacement per port settingSoftware Management Telnet Management InterfaceMain Menu IP Menu IP Settings DescriptionSnmp Menu Snmp Settings DescriptionStatus Description Port ConfigAdministrator Administrator Vlan SettingsPort Setting Description Vlan ID Vlan Information DescriptionVlan Global Settings Description VID Setting DescriptionInput Description Tagging with ingress Pvid for all packets Per Port Settings DescriptionAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Security Manager Restore Default ValuesReboot System Update FirmwareSetting Description ExitLogin to the Switch Unit Web ManagementStart Browser Software and Making Connection Page Port Status Description Port Status MenuMenu Function Basic MenuIP Address IP Address Setting Description System Settings DescriptionSnmp Entries Community Settings Description Trap Manager Settings Description Port Settings DescriptionPort Controls Vlan Controls Global Settings Description Vlan Group ConfigurationIngress Rules Group Settings Description Per Port Settings Insertion for untagged packets only is selected Egress RulesQoS Controls QoS Per Port Settings DescriptionQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Image Refresh Time Settings DescriptionRestore Default MIB Objects Snmp ManagementSnmp Traps ObjectsAppendix. Factory Default Settings QoS Settings