KTI Networks KSD-800M manual Update Firmware, Restore Default

Page 62

5.4.7 Update Firmware

This menu is used to perform firmware (switch software) upgrade via TFTP protocol. Before doing TFTP operation, one TFTP server must be available in the network to where this switch is connected and the new firmware file image.bin is placed in the server.

Settings	Description

TFTP Server IP Address	Specify the IP address of the TFTP server
Firmware File Name	Specify the file name of the new firmware
Apply	Button to confirm the settings

5.4.8 Restore Default

This menu is used to restore all settings of the switch with factory default values. Note that this menu might change the current IP address of the switch and make your current http connection lost.

5.4.9 Reboot System

This menu is used to reboot the switch unit with current configuration remotely. Starting this menu will make your current http connection lost. You must rebuild the connection to perform any management operation to the unit.

-62-

Image 62

Contents Installation Guide KSD-800MPage Trademarks Table of Contents Snmp Management Plug and Play IntroductionModel series 10/100TX TP Ports 100FX fiber ports Auto Copper/Fiber ConnectionsBasic functions FeaturesDesigned for Industrial Applications Management functionsProduct Panels Front Panel Network PortsLED Indicators FunctionSpecifications Top Panel10/100TX Twisted Pair Ports Switch FunctionsLED Indicators Vlan Function Port Configuration Control FunctionSoftware Management Functions QoS FunctionMechanical DC Power InputModel Definitions EnvironmentalOptical Specifications Unpacking InstallationSafety Cautions DIN-Rail Mounting Panel Mounting Page Applying Power Using Terminal BlocksPower Failure Relay Output Using DC Power JackReset Button Making UTP ConnectionsFar End Fault Function Making Fiber ConnectionsLED Indication Function State InterpretationConfiguring Snmp Settings Configuring IP Address for the SwitchConfiguring User Name and Password Configuring Port 7 and PortQoS Function Egress Service PolicyAdvanced Functions Priority LevelDscp Classification per port setting Port-based Priority Setting per port setting3.2 802.1p Classification per port setting User Defined Dscpa Classification GlobalUser Defined IPA Classification Global Other QoS SettingsIP Network Address Classification User Defined IPB Classification GlobalVlan Function Vlan OperationUnmatched VID Filtering per port setting 2.1 802.1Q Tag Aware Vlan Mode global settingIngress Member Filtering global setting Ingress RulesPacket Forwarding under Vlan Egress Tag Rule per port settingVlan Group Mapping Egress Tagging RulesNull VID Replacement per port setting Summary of Vlan FunctionMain Menu Software ManagementTelnet Management Interface IP Settings Description IP MenuSnmp Settings Description Snmp MenuPort Config Status DescriptionPort Setting Description AdministratorAdministrator Vlan Settings Vlan Information Description Vlan IDInput Description Vlan Global Settings DescriptionVID Setting Description Per Port Settings Description Tagging with ingress Pvid for all packetsAdministrator QoS Settings Select 1 Show QoS Other Status to view other settings global QoS Other Settings Description Restore Default Values Security ManagerSetting Description Update FirmwareReboot System ExitStart Browser Software and Making Connection Login to the Switch UnitWeb Management Page Port Status Menu Port Status DescriptionBasic Menu Menu FunctionSnmp Entries IP Address IP Address Setting DescriptionSystem Settings Description Community Settings Description Port Controls Trap Manager Settings DescriptionPort Settings Description Vlan Controls Ingress Rules Global Settings DescriptionVlan Group Configuration Group Settings Description Per Port Settings Egress Rules Insertion for untagged packets only is selectedQoS Per Port Settings Description QoS ControlsQoS Global Settings Description IPA address and IPA subnet mask specify IPA user defined Settings Description Image Refresh TimeRestore Default Snmp Traps Snmp ManagementMIB Objects ObjectsAppendix. Factory Default Settings QoS Settings