Canon LV-7220 Basic Operation, Turning On the Projector, Enter a PIN code, What is PIN code?

Page 20

Basic Operation

Turning On the Projector

1	Complete peripheral connections (with a computer, VCR,
	etc.) before turning on the projector.
2	Connect the projector's AC power cord into an AC outlet.
	The POWER indicator blinks red in a moment and lights red.
3	Press the POWER button on the top control or on the
	remote control unit. The POWER indicator turns green
	lighting and the cooling fans start to operate. The
	preparation display appears on the screen and the count
	down starts.
4	After the count-down, the image level that was selected last
	and the Lamp mode status icon (see page 45) appear on the

screen.

✔Note:

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Select a number by pressing the Point 7 8 button and fix the number with the SET button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SET button so that you can start to operate the projector.

If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to PIN code lock function in Setting on page 47 for locking operation of the projector with your PIN code.

16

The preparation display disappears after 30 seconds.

Selected Image Level and Lamp Mode

Lamp mode

(See page 45 for Lamp mode.)

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

20

Image 20

Contents LV-7225LV-7220LV-5220 See page 32 Features and DesignBlackboard can be used as a projection screen Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Hinweise für DeutschlandMoving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communication Commission NoticeLens Cover See page 50 for attaching Part Names and FunctionsFront Back Bottom Rear Terminal Top Control Remote Control Unit Signal Emission indicatorLaser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangeRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImagePositioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe Connecting to a Computer Cables used for connectionConnecting to Video Equipment StereoConnecting to Component Video Equipment Component RGB OUTWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeWhen the projector has cooled down enough to be turned on Again, the Power indicator lights red. Then you canDisconnect the AC power cord Turning Off the ProjectorHow to Operate the On-Screen Menu Remote Control UnitOn-Screen Menu Top ControlMenu Bar PC System MenuZoom and Focus Adjustment Auto Setup FunctionNo Show Function Keystone AdjustmentPicture Freeze Function Timer Function Sound AdjustmentVolume MuteComputer Input Input Source SelectionMode Computer System SelectionAuto Auto PC Adjustment To store adjustment parametersPC Adjust Menu Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection StandardHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentPicture level adjusted for the picture with fine tone User preset image in the Image Adjust Menu p39Cinema Image button Standard Cinema BlackboardGreen CustomPress the Point 78 button to obtain proper color. From 0 to ColorTint Film Resets all adjustment to their previous figureProgressive Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting SettingAuto setup LanguageBlue back DisplayLogo PIN code lock Enter a Logo PIN codeLogo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockTo Change the PIN code To Change the PIN code lock settingPIN code lock Lamp counter reset Factory defaultFan Factory default FanThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control Unit does not work. Check the batteries AppendixMenu Tree Setting Image Select Image Adjust ScreenIndicators and Projector Condition KHz Compatible Computer SpecificationsFreq Technical Specifications Optional Parts LV-CA31 Not available in the U.S.AThis cable is used for RGB 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-IWhile the projector is locked with the PIN code Canon Communication & Image France S.A 1AA6P1P4619--MT7P