Canon LV-7225, LV-5220, LV-7220 owner manual Input Source Selection Component, RGB Scart 21-Pin

Page 36

Video Input

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Computer 2, and then press the SET button. The Source
	Select Menu will appear.
3	Move the pointer to the correct input source and then press
	the SET button.
		When the input source is coming from video
Component
		equipment connected to the RGB IN-2/

		COMPONENT IN/ RGB OUT terminal with a
		Component-VGA Cable, select Component.

INPUT button

Computer 1

Computer 2 ✳

Video

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 and press the SET button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB (Scart) and press the SET button.

RGB (Scart)

When the input source is coming from video equipment connected to the RGB IN-2/ COMPONENT IN/ RGB OUT terminal with a Scart-VGA Cable, select RGB (Scart).

✔Note:

•Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 61 for order.

•Computer 2 is not displayed when the RGB IN-2/ COMPONENT IN/ RGB OUT terminal is set as Monitor out. (p44)

36

Image 36

Contents LV-7225LV-7220LV-5220 Features and Design Blackboard can be used as a projection screenSee page 32 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Hinweise für DeutschlandInstalling the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions Front Back BottomLens Cover See page 50 for attaching Rear Terminal Top Control Remote Control Unit Signal Emission indicatorLaser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangeRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageInstallation Adjustable FeetPositioning the Projector Connecting the AC Power Cord For the U.S.A. and Canada For Continental Europe200 240 V AC Connecting to a Computer Cables used for connectionConnecting to Video Equipment StereoConnecting to Component Video Equipment Component RGB OUTWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeWhen the projector has cooled down enough to be turned on Again, the Power indicator lights red. Then you canDisconnect the AC power cord Turning Off the ProjectorHow to Operate the On-Screen Menu Remote Control UnitOn-Screen Menu Top ControlMenu Bar PC System MenuZoom and Focus Adjustment Auto Setup FunctionKeystone Adjustment Picture Freeze FunctionNo Show Function Timer Function Sound AdjustmentVolume MuteComputer Input Input Source SelectionComputer System Selection AutoMode Auto PC Adjustment To store adjustment parametersPC Adjust Menu Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection StandardHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentPicture level adjusted for the picture with fine tone User preset image in the Image Adjust Menu p39Cinema Image button Standard Cinema BlackboardGreen CustomColor TintPress the Point 78 button to obtain proper color. From 0 to Resets all adjustment to their previous figure ProgressiveFilm Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting SettingAuto setup LanguageBlue back DisplayLogo PIN code lock Enter a Logo PIN codeLogo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockTo Change the PIN code lock setting PIN code lockTo Change the PIN code Lamp counter reset Factory defaultFan Factory default FanMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the matters below Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control Unit does not work. Check the batteries AppendixMenu Tree Setting Image Select Image Adjust ScreenIndicators and Projector Condition Compatible Computer Specifications FreqKHz Technical Specifications Optional Parts LV-CA31 Not available in the U.S.AThis cable is used for RGB 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-IWhile the projector is locked with the PIN code Canon Communication & Image France S.A 1AA6P1P4619--MT7P