Canon LV-5220, LV-7225, LV-7220 owner manual Computer System Selection, Auto, Mode

Page 28

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 59 )

✔Note:

The projector may display one of the following messages.

Auto	When the projector cannot recognize connected
	signal conforming to PC Systems provided in this
	signal conforming to PC Systems provided in this
	projector, Auto PC Adjustment function works to
	display proper images and the message “Auto” is
	displayed on the PC System menu box. When the
	image is not projected properly, manual adjustment is
	required. (p30, 31)

-----There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54)

Mode 1	User preset system manually adjusted in PC Adjust
	menu. Adjustment data can be stored in Mode 1 - 5.
	menu. Adjustment data can be stored in Mode 1 - 5.
	(p30, 31)
	PC Systems provided in the projector. The projector
SVGA 1	PC Systems provided in the projector. The projector
	chooses a proper system and displays it.
	chooses a proper system and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the PC System Menu icon.
2	Press the Point d button to move the red arrow pointer to
	the system that you want to set, and then press the SET

button.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

PC System Menu

The PC System Menu icon displays the system being selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p30, 31)

The systems on this dialog box can be selected.

28

Image 28

Contents LV-7225LV-7220LV-5220 Blackboard can be used as a projection screen Features and DesignSee page 32 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Hinweise für DeutschlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeFront Back Bottom Part Names and FunctionsLens Cover See page 50 for attaching Rear Terminal Top Control Remote Control Unit Signal Emission indicatorLaser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangeRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageAdjustable Feet InstallationPositioning the Projector For the U.S.A. and Canada For Continental Europe Connecting the AC Power Cord200 240 V AC Connecting to a Computer Cables used for connectionConnecting to Video Equipment StereoConnecting to Component Video Equipment Component RGB OUTWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeWhen the projector has cooled down enough to be turned on Again, the Power indicator lights red. Then you canDisconnect the AC power cord Turning Off the ProjectorHow to Operate the On-Screen Menu Remote Control UnitOn-Screen Menu Top ControlMenu Bar PC System MenuZoom and Focus Adjustment Auto Setup FunctionPicture Freeze Function Keystone AdjustmentNo Show Function Timer Function Sound AdjustmentVolume MuteComputer Input Input Source SelectionAuto Computer System SelectionMode Auto PC Adjustment To store adjustment parametersPC Adjust Menu Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection StandardHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentPicture level adjusted for the picture with fine tone User preset image in the Image Adjust Menu p39Cinema Image button Standard Cinema BlackboardGreen CustomTint ColorPress the Point 78 button to obtain proper color. From 0 to Progressive Resets all adjustment to their previous figureFilm Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting SettingAuto setup LanguageBlue back DisplayLogo PIN code lock Enter a Logo PIN codeLogo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockPIN code lock To Change the PIN code lock settingTo Change the PIN code Lamp counter reset Factory defaultFan Factory default FanProjector is shut down and the Warning indicator lights red Maintenance and CleaningThen check the matters below Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control Unit does not work. Check the batteries AppendixMenu Tree Setting Image Select Image Adjust ScreenIndicators and Projector Condition Freq Compatible Computer SpecificationsKHz Technical Specifications Optional Parts LV-CA31 Not available in the U.S.AThis cable is used for RGB 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-IWhile the projector is locked with the PIN code Canon Communication & Image France S.A 1AA6P1P4619--MT7P