Canon LV-7220, LV-7225, LV-5220 Auto PC Adjustment, To store adjustment parameters, PC Adjust Menu

Page 29

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.

	Auto PC Adj.
1	Press the MENU button to display the On-Screen Menu.
	Press the Point 7 8 button to move the red frame pointer to
	PC Adjust Menu icon.
2	Press the Point d button to move the red frame pointer to
	Auto PC Adj. icon and then press the SET button twice.

This Auto PC Adjustment can be also executed by pressing the Auto PC button on the remote control unit.

To store adjustment parameters

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the PC System Menu (p28). See “Store” on page 31.

PC Adjust Menu

PC Adjust Menu icon

Move the red frame pointer to the Auto PC Adj. icon and press the SET button.

✔Note:

•Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31)

•The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu. (p28)

Computer Input

29

Image 29

Contents LV-7225LV-7220LV-5220 See page 32 Features and DesignBlackboard can be used as a projection screen Table of Contents Risk of Electric Shock Do not Open To the OwnerHinweise für Deutschland Safety InstructionsMoving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communication Commission Notice ComplianceLens Cover See page 50 for attaching Part Names and FunctionsFront Back Bottom Rear Terminal Top Control Signal Emission indicator Remote Control UnitPointer Function Laser Pointer FunctionOperating Range Wireless Mouse OperationRemote Control Battery Installation Remote Control CodeButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImagePositioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe Cables used for connection Connecting to a ComputerStereo Connecting to Video EquipmentComponent RGB OUT Connecting to Component Video EquipmentBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeAgain, the Power indicator lights red. Then you can When the projector has cooled down enough to be turned onDisconnect the AC power cord Turning Off the ProjectorRemote Control Unit How to Operate the On-Screen MenuOn-Screen Menu Top ControlPC System Menu Menu BarAuto Setup Function Zoom and Focus AdjustmentNo Show Function Keystone AdjustmentPicture Freeze Function Sound Adjustment Timer FunctionVolume MuteInput Source Selection Computer InputMode Computer System SelectionAuto To store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment Mode free ResetDisplay area Display area HStandard Image Level SelectionHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputInput button Video Computer Video button Source Select Menu VideoInput button Computer Video Computer button Input Source Selection Component, RGB Scart 21-PinAuto Video System SelectionAV System Menu Video or S-Video AV System Menu ComponentUser preset image in the Image Adjust Menu p39 Picture level adjusted for the picture with fine toneCinema Image button Standard Cinema BlackboardGreen CustomPress the Point 78 button to obtain proper color. From 0 to ColorTint Film Resets all adjustment to their previous figureProgressive Provides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Setting SettingAuto setup LanguageDisplay Blue backLogo PIN code lock Enter a Logo PIN codeCapture LogoCeiling RearPower management Standby modeLamp mode On startPointer Remote controlUSB Key lockTo Change the PIN code To Change the PIN code lock settingPIN code lock Factory default Lamp counter resetFan Factory default FanThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Attaching the Lens Cover Cleaning the Air FiltersCleaning the Projector Cabinet Cleaning the Projection LensReset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Remote Control Unit does not work. Check the batteriesMenu Tree Image Select Image Adjust Screen SettingIndicators and Projector Condition KHz Compatible Computer SpecificationsFreq Technical Specifications LV-CA31 Not available in the U.S.A Optional PartsThis cable is used for RGB 21-Pin Video output of video equipmentUSB Connector Series B Configurations of TerminalsTerminal HDB15-PIN Terminal DVI-IWhile the projector is locked with the PIN code 1AA6P1P4619--MT7P Canon Communication & Image France S.A