Canon LV-7220 Video Input, Input Source Selection Video, S-Video, Source Select Menu Video

Page 35

Video Input

Input Source Selection (Video, S-Video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

	1	Press the MENU button and the On-Screen Menu will
		appear. Press the Point 7 8 button to move the red frame
		pointer to the Input Menu icon.
	2	Press the Point d button to move the red arrow pointer to
		Video and then press the SET button. The Source Select
		Menu will appear.
	3	Move the pointer to the source that you want to select and
		then press the SET button.
			When selecting Auto, the projector automatically
		Auto	When selecting Auto, the projector automatically
		Auto	detects incoming video signal, and adjusts itself to
			detects incoming video signal, and adjusts itself to
			optimize its performance. The projector selects
			connection in the following order:
			1st S-Video
			2nd Video
			The S-VIDEO jack has priority over the VIDEO jack
			under the condition of connecting both the S-VIDEO
			jack and the VIDEO jack.
			When video input signal is connected to the VIDEO
		Video	When video input signal is connected to the VIDEO
		Video	jack, select Video.
			jack, select Video.
			When video input signal is connected to the S-VIDEO
	S-Video		When video input signal is connected to the S-VIDEO
	S-Video		jack, select S-Video.
			jack, select S-Video.

INPUT button

Video

Computer 1

Computer 2 ✳

VIDEO button

Video

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

Move the pointer to Video and press the SET button.

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SET button.

Video Input

✔Note:

When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. (p44)

35

Image 35

Contents LV-7225LV-7220LV-5220 See page 32 Features and DesignBlackboard can be used as a projection screen Table of Contents Risk of Electric Shock Do not Open To the OwnerHinweise für Deutschland Safety InstructionsMoving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communication Commission Notice ComplianceLens Cover See page 50 for attaching Part Names and FunctionsFront Back Bottom Rear Terminal Top Control Signal Emission indicator Remote Control UnitPointer Function Laser Pointer FunctionOperating Range Wireless Mouse OperationWith holding down the Menu button, press the Image Remote Control CodeRemote Control Battery Installation Button. The code switches sequentially for one pressingPositioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe Cables used for connection Connecting to a ComputerStereo Connecting to Video EquipmentComponent RGB OUT Connecting to Component Video EquipmentEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector When the projector has cooled down enough to be turned onAgain, the Power indicator lights red. Then you can Disconnect the AC power cordTop Control How to Operate the On-Screen MenuRemote Control Unit On-Screen MenuPC System Menu Menu BarAuto Setup Function Zoom and Focus AdjustmentNo Show Function Keystone AdjustmentPicture Freeze Function Mute Timer FunctionSound Adjustment VolumeInput Source Selection Computer InputMode Computer System SelectionAuto Auto PC Adj Auto PC AdjustmentTo store adjustment parameters PC Adjust MenuManual PC Adjustment Display area H ResetMode free Display area BlackboardGreen Image Level Selection Standard High contrastImage Level Adjustment Screen Size Adjustment Source Select Menu Video Video InputInput Source Selection Video, S-Video Input button Video Computer Video buttonInput button Computer Video Computer button Input Source Selection Component, RGB Scart 21-PinAV System Menu Component Video System SelectionAuto AV System Menu Video or S-VideoImage button Standard Cinema BlackboardGreen Custom Picture level adjusted for the picture with fine toneUser preset image in the Image Adjust Menu p39 CinemaPress the Point 78 button to obtain proper color. From 0 to ColorTint Film Resets all adjustment to their previous figureProgressive Provides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Language SettingSetting Auto setupEnter a Logo PIN code Blue backDisplay Logo PIN code lockRear LogoCapture CeilingOn start Standby modePower management Lamp modeKey lock Remote controlPointer USBTo Change the PIN code To Change the PIN code lock settingPIN code lock Fan Lamp counter resetFactory default Fan Factory defaultThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Attaching the Lens Cover Cleaning the Air FiltersCleaning the Projector Cabinet Cleaning the Projection LensReset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Remote Control Unit does not work. Check the batteriesMenu Tree Image Select Image Adjust Screen SettingIndicators and Projector Condition KHz Compatible Computer SpecificationsFreq Technical Specifications Video output of video equipment Optional PartsLV-CA31 Not available in the U.S.A This cable is used for RGB 21-PinTerminal DVI-I Configurations of TerminalsUSB Connector Series B Terminal HDB15-PINWhile the projector is locked with the PIN code 1AA6P1P4619--MT7P Canon Communication & Image France S.A