Canon LV-5220, LV-7225, LV-7220 Video System Selection, Auto, AV System Menu Video or S-Video

Page 37

Video Input

Video System Selection

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the AV System Menu icon.
2	Press the Point d button to move the red arrow pointer to
	the system that you want to select and then press the SET

button.

Video or S-Video

Auto

The projector automatically detects incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Component

Auto

The projector automatically detects incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

AV System Menu (Video or S-Video)

AV System Menu icon

This box indicates the system being selected.

Move the pointer to a system and press the SET button.

AV System Menu (Component)

AV System Menu icon

This box indicates the system being selected.

Move the pointer to a system and press the SET button.

Video Input

✔Note:

The AV System Menu cannot be selected when selecting RGB(Scart).

37

Image 37

Contents LV-7225LV-7220LV-5220 Blackboard can be used as a projection screen Features and DesignSee page 32 Table of Contents Risk of Electric Shock Do not Open To the OwnerHinweise für Deutschland Safety InstructionsAir Circulation Installing the Projector in Proper PositionMoving the Projector Federal Communication Commission Notice ComplianceFront Back Bottom Part Names and FunctionsLens Cover See page 50 for attaching Rear Terminal Top Control Signal Emission indicator Remote Control UnitPointer Function Laser Pointer FunctionOperating Range Wireless Mouse OperationRemote Control Battery Installation Remote Control CodeButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageAdjustable Feet InstallationPositioning the Projector For the U.S.A. and Canada For Continental Europe Connecting the AC Power Cord200 240 V AC Cables used for connection Connecting to a ComputerStereo Connecting to Video EquipmentComponent RGB OUT Connecting to Component Video EquipmentBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeAgain, the Power indicator lights red. Then you can When the projector has cooled down enough to be turned onDisconnect the AC power cord Turning Off the ProjectorRemote Control Unit How to Operate the On-Screen MenuOn-Screen Menu Top ControlPC System Menu Menu BarAuto Setup Function Zoom and Focus AdjustmentPicture Freeze Function Keystone AdjustmentNo Show Function Sound Adjustment Timer FunctionVolume MuteInput Source Selection Computer InputAuto Computer System SelectionMode To store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment Mode free ResetDisplay area Display area HStandard Image Level SelectionHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputInput button Video Computer Video button Source Select Menu VideoInput button Computer Video Computer button Input Source Selection Component, RGB Scart 21-PinAuto Video System SelectionAV System Menu Video or S-Video AV System Menu ComponentUser preset image in the Image Adjust Menu p39 Picture level adjusted for the picture with fine toneCinema Image button Standard Cinema BlackboardGreen CustomTint ColorPress the Point 78 button to obtain proper color. From 0 to Progressive Resets all adjustment to their previous figureFilm Provides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Setting SettingAuto setup LanguageDisplay Blue backLogo PIN code lock Enter a Logo PIN codeCapture LogoCeiling RearPower management Standby modeLamp mode On startPointer Remote controlUSB Key lockPIN code lock To Change the PIN code lock settingTo Change the PIN code Factory default Lamp counter resetFan Factory default FanProjector is shut down and the Warning indicator lights red Maintenance and CleaningThen check the matters below Attaching the Lens Cover Cleaning the Air FiltersCleaning the Projector Cabinet Cleaning the Projection LensReset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Remote Control Unit does not work. Check the batteriesMenu Tree Image Select Image Adjust Screen SettingIndicators and Projector Condition Freq Compatible Computer SpecificationsKHz Technical Specifications LV-CA31 Not available in the U.S.A Optional PartsThis cable is used for RGB 21-Pin Video output of video equipmentUSB Connector Series B Configurations of TerminalsTerminal HDB15-PIN Terminal DVI-IWhile the projector is locked with the PIN code 1AA6P1P4619--MT7P Canon Communication & Image France S.A