Operating
Adjusting screen with ONE-TOUCH
1. | Press the ONE TOUCH button on the remote control. This | MAGNIFY | VOLUME |
| activates the following functions at one time. | ON | MUTE |
Signal search: Projector will cycle through its input ports in | FREEZE | ||
OFF |
| ||
|
|
| |
order to find any input signal. The search is started from the current port. Then when an input is found, the projector will
stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
RGB IN1 RGB IN2
Auto adjust: Projector automatically adjusts the picture position and size in RGB mode, and automatically selects the signal mode in VIDEO input (29).
Automatic keystone distortion correction: Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This is only performed if ONE TOUCH of the OPTION menu is set to TURN ON
(38).
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
At a RGB/DVI signal NORMAL 4:3 16:9
ASPECT
At a video signal/no signal 4:3 16:9 SMALL
●The NORMAL mode keeps the original aspect ratio of the signal.
●At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO input, only 16:9 mode can be selected.
●Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom and focus | Focus ring | Zoom knob | |
1. | Use the zoom knob to adjust the screen size. |
|
|
2. | Use the focus ring to focus the picture. |
|
|
18