Operating
Multifunctional
settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty., INPUT, SETUP, SCREEN, OPTION, NETWORK and EASY MENU. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.
STANDBY/ON
INPUT
LAMP
TEMP
POWER
MENU
KEYSTONE
ENTER button Cursor buttons 
MENU button
|
| STANDBY/ON VIDEO | RGB |
|
|
| UP |
|
|
| PAGE |
|
|
| DOWN |
ASPECT |
| BLANK | LASER |
|
| ASPECT |
|
PUSH |
|
|
|
ENTER |
| ENTER |
|
ESC | MENU RESET | ESC MENU | RESET |
POSITION AUTO |
| ||
|
|
|
|
|
|
|
|
| MAGNIFY | VOLUME |
|
|
| POSITION | AUTO |
| ON |
|
| RESET | RESET button | VOLUME | OFF | FREEZE MUTE | ||
| MAGNIFY |
|
| KEYSTONE ONE TOUCH | |||
1. | Press the MENU button on the remote control or one of |
| MENU [RGB] |
| :SELECT | ||
the cursor buttons on the projector. |
|
|
| IMAGE | CONTRAST ＋0 | ||
|
|
|
| PICTURE | BRIGHT ＋0 | ||
The advanced MENU or EASY MENU will appear. |
|
| VIDEO Qlty. GAMMA DEFAULT 1 | ||||
|
|
|
|
| INPUT | COLOR TEMP 6500K | |
At the EASY MENU |
|
|
| SETUP | COLOR +0 | ||
|
|
| SCREEN | TINT +0 | |||
|
|
|
|
| OPTION | SHARPNESS +0 | |
| If you want to change it to the advanced MENU, select the | NETWORK | MY MEMORY SAVE 1 | ||||
2. "Go to Advanced Menu". |
|
|
| EASY MENU |
|
| |
|
|
| EASY MENU |
| |||
3. | Use the cursor buttons ▲/▼ to select an item to operate. |
| ASPECT 4:3 | ||||
| MODE NORMAL | ||||||
|
|
|
| BRIGHT |
| +0 | |
4. | Use the cursor buttons◄/► to operate the item. |
|
| CONTRAST | +0 | ||
|
| TINT |
| +0 | |||
|
|
|
| COLOR |
| +0 | |
|
|
|
| SHARPNESS | +3 | ||
At the advanced MENU |
|
|
| WHISPER NORMAL | |||
|
|
| MIRROR NORMAL | ||||
2. Use the cursor buttons ▲/▼ to select a menu.
If you want to change it to the EASY MENU, select the
EASY MENU.
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to progress. The display of the selected menu will be active.
3. Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.
4. Use the cursor buttons▲/▼ to operate the item.
●When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset.
●At the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.
5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed. | 23 |