Dukane 8915 user manual Lamp, Case of replacement by yourself

Page 57

Lamp cover

1.

2.

Maintenance

Lamp (continued)

When the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.

Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

To prepare a new lamp, contact your dealer and tell the lamp type number = 456-8915. If the projector is mounted on the ceiling, or if the lamp has

broken, also ask the dealer to replace the lamp.

In the case of replacement by yourself,

3. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing up.

4. Please unhook the claws of the lamp cover using a minus screwdriver or similar, and

remove the lamp cover.

5. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the

handles.

6. Insert the new lamp, and retighten ﬁrmly two screws that are loosened in the previous

process to lock it in place.

7. Interlocking the 2 tabs of the lamp cover to the projector, position the lamp cover on the

projector. Then push the center point of two claws to ﬁx the lamp cover.

8. Slowly turn the projector so that the top is facing up.

9. Turn the projector on, and reset the lamp time using the LAMP TIME function of OPTION

menu (39).

Claws

Screws marked

by arrow

Tabs

Center point of claws

Claws

NOTE • When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed, complete the following operation within 10 minutes of switching power on.

•Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

45

Image 57

Contents LCD Projector Model Page About The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Fastening the lens cap Projector Part namesComponent P B P RLaser Indicator 14 Remote controlControl buttons STANDBY/ONSetting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator About the ﬁlter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with ampliﬁer outputExamples of connection with a computer LAN cable CAT-5 RGB out LAN portComponent video out RGB cable CB/PBConnecting power supply Remote control Laser pointerPutting batteries Using the remote control Turning on the power Power on/offTurning off the power STANDBY/ONSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Adjusting screen with ONE-TOUCHPress the ONE Touch button on the remote control. This Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Using the menu function Multifunctional settingsAt the Easy Menu At the advanced MenuEasy Menu Easy Menu ResetMirror Filter TimeGamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SharpnessLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1MY Memory Image Menu PhaseOver Scan PositionImage Menu Auto AdjustSize ExecuteProgressive Video Qlty. Menu3D-YCS Video NRInput Menu Video FormatDVI Information Input MenuVolume Setup MenuStereo IR RemoteMenu Position Screen MenuOSD Bright Bright  DarkStart UP Screen MenuMy Screen My Screen LockMessage No Input is DetectedSync is OUT of Range ONE Touch Option MenuAuto Search Auto OFFOption Menu Network Menu When your network enables the Dhcp function Network MenuEx. Case of IP Address = Screen Network Menu Lamp MaintenanceLamp Case of replacement by yourselfAir ﬁlter Page Related messages Related messages Internal portion temperature is risingRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedThese has not been properly ﬁxed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects Digital RGB input Video input SpeciﬁcationRGB input RGB output Communication portSpeciﬁcations Page Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsDVI -D RTS Audio in Ø3.5 stereo mini jack, J K Audio INL/R RCA jackCTS DC OUTConnecting the cable Communications settingRS-232C Communication Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF FB FA Color Temp Gain G Progressive Color Space Mute OSD Bright Dukane Corporation Audio Visual Products