Dukane 8915 user manual Option Menu

Page 51

Multifunctional settings

OPTION Menu (continued)

Item

Description

 

The lamp time is the time counted after the last resetting. It is

 

shown in the OPTION menu as the use time of the lamp.

 

Pressing the RESET button on the remote control or the button ►

 

of the projector for about 3 seconds displays a dialog. To reset the

LAMP TIME

lamp time, select the RESET using the button ▲.

RESET CANCEL

 

 

• Please reset the lamp time only when you have replaced the lamp,

 

for correct messages about the lamp.

 

• About the lamp replacement, see the section "Lamp" (44, 45).

 

The filter time is the time counted after the last resetting. It is shown

 

in the OPTION menu as the use time of the air filter.

 

Pressing the RESET button on the remote control or the button ►

 

of the projector for about 3 seconds displays a dialog. To reset the

FILTER TIME

filter time, select the RESET using the button ▲.

RESET CANCEL

 

 

• Please reset the filter time only when you have cleaned or

 

replaced the air filter, for correct messages about the air filter.

 

• About the caring the air filter, see the section "Air filter" (46).

 

Selecting this item displays the SERVICE menu.

 

Select an item using the buttons ▲/▼, and press the button ► or

 

the ENTER button on the remote control to progress.

 

FAN SPEED AUTO ADJUST GHOST FACTORY RESET

 

FAN SPEED

 

Using the buttons ▲/▼ switches the rotation speed of the cooling

 

fans. The HIGH is the mode for use at highlands etc. Note that the

 

projector is noisier when the HIGH is selected.

 

HIGH NORMAL

SERVICE

AUTO ADJUST

Using the buttons ▲/▼ enable/disable the automatic adjustment.

 

 

ENABLE DISABLE

 

GHOST

 

1. Select a color element of ghost using the buttons ◄/►.

 

2. Adjust the selected element using the buttons ▲/▼ to disappear ghost.

 

FACTORY RESET

 

Selecting RESET using the button ▲ performs this function. By this

 

function, all the items in all of menu will collectively return to the

 

initial setting. Note that the items LAMP TIME, FILTER TIME and

 

LANGUAGE are not reset.

 

RESET CANCEL

39

Page 50 Page 52
Image 51
Page 50 Page 52
Contents LCD Projector Model Page About The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Fastening the lens cap P B P R Part namesProjector ComponentSTANDBY/ON Remote controlLaser Indicator 14 Control buttonsSetting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer CB/PB RGB out LAN portLAN cable CAT-5 Component video out RGB cableConnecting power supply Remote control Laser pointerPutting batteries Using the remote control STANDBY/ON Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Adjusting screen with ONE-TOUCHAdjusting the zoom and focus Press the ONE Touch button on the remote control. This At a video signal Using the automatic adjustment featureAdjusting the position  At a RGB signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control At the advanced Menu Multifunctional settingsUsing the menu function At the Easy MenuEasy Menu Filter Time ResetEasy Menu MirrorGamma Picture MenuSharpness Picture MenuHigh  Middle  LOW  Custom Color TempLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1MY Memory Position PhaseImage Menu Over ScanExecute Auto AdjustImage Menu SizeVideo NR Video Qlty. MenuProgressive 3D-YCSInput Menu Video FormatDVI Information Input MenuIR Remote Setup MenuVolume StereoBright  Dark Screen MenuMenu Position OSD BrightMy Screen Lock Screen MenuStart UP My ScreenMessage No Input is DetectedSync is OUT of Range Auto OFF Option MenuONE Touch Auto SearchOption Menu Network Menu When your network enables the Dhcp function Network MenuEx. Case of IP Address = Screen Network Menu Lamp MaintenanceLamp Case of replacement by yourselfAir filter Page Related messages Related messages Internal portion temperature is risingRegarding the indicator lamps Regarding the indicator lamps Phenomenon Cases not involving a machine defect Reference Electrical power cord is not pluggedPower switch is not set to the on position These has not been properly fixedPhenomena that may easily be mistaken for machine defects RGB output Communication port SpecificationDigital RGB input Video input RGB inputSpecifications Page Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsDVI -D DC OUT Audio in Ø3.5 stereo mini jack, J K Audio INL/R RCA jackRTS CTSConnecting the cable Communications settingRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandCRC Be EF FB FA Color Temp Gain G Progressive Color Space Mute OSD Bright Dukane Corporation Audio Visual Products
Top Page Image Contents