Dukane 8111H Mail Settings, Displays and configures e-mail addressing settings, Send mail

Page 19

3. Network Functions

3.1 Configuring and controlling the projector via a web browser (continued)

3.1.5 Mail Settings

Displays and configures e-mail addressing settings.

	Item	Description

	Send mail	Click [Enable] check box to use the e-mail function. Configure
	Send mail	the conditions for sending e-mail under the Alert Settings.
		the conditions for sending e-mail under the Alert Settings.
		Configures the address of the mail server in IP format.
		• The address allows not only IP address but also domain
	SMTP Server Address	name if the valid DNS server is setup in the Network Settings.
		The maximum length of host or domain name is up to 255
		characters.
	Sender E-mail address	Configures the sender e-mail address.
	Sender E-mail address	The length of the sender e-mail address can be up to 255
		alphanumeric characters.
		Configures the e-mail address of up to five recipients. You
	Recipient E-mail address	can also specify [TO] or [CC] for each address. The length of
		the recipient e-mail address can be up to 255 alphanumeric
		characters.

Click [Apply] button to save the settings.

NOTE • You can confirm whether the mail settings work correctly using [Send Test Mail] button. Please enable Send mail setting before clicking [Send Test Mail].

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

19

Image 19

Contents Messenger Function Thank you for purchasing this projectorWeb control MY Image Still Image Transfer DisplayNetwork Functions Content Main functionsEquipment connection and network setting Configuring and controlling the projector via a web browserMY Image Still image Transfer Display Configuring and controlling via a web browserMessenger Function Required equipment preparation Setup menu in the User’s Manual Operating GuideOpen Network Connections. .2.2.b Manual network connection settingNetwork settings Equipments connectionSet IP address, subnet mask and default gateway for computer Manual network connection settingSetting automatically About IP address Setting manuallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowMail Alerts Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Command Control via the NetworkConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordNetwork Information Projector Name Displays the projector name settingsDisplays the Dhcp configuration settings Only displayed when logged on using an Administrator IDDisplays and configures network settings Displays and configures communication port settings Port SettingsClick Apply button to save the settings Smtp Server Address Mail SettingsDisplays and configures e-mail addressing settings Send mailCold Start Alert SettingsDisplays and configures failure & alert settings Authentication FailureAlert Items are shown below Displays and configures schedule settings Schedule SettingsDate Month/Day Description ScheduleDisplays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Cycle Time differenceSecurity Settings Community name Configures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the horizontal picture position Adjusts the vertical picture positionHdmi Detected Displays the current projector status Projector StatusLogoff When Logoff is clicked, the Logon menu is displayed. 14Network Restart Restarts the projector’s network connectionMail Alerts Mail Settings 19Mail Alerts Snmp Settings 17 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 22Manual concise Date/Time Settings 24Still Image Transfer Network Restart on the main menu MY Image Still Image Transfer DisplayMessenger Function Messenger Function Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network TCP #9715 Command FormatReply Error code Header Data length RS-232C command Check Sum ConnectionReply Data format Automatic Connection Break AuthenticationLAN port Control port Connecting devicesOperating Guide Communication setupCondition HALF-DUPLEX Transmission methodFULL-DUPLEX HALF-DUPLEXDukane Corp AV Service Dept