Dukane 8111H Alert Settings, Displays and configures failure & alert settings, Cold Start

Page 20

3.Network Functions

3.1Configuring and controlling the projector via a web browser (continued)

3.1.6 Alert Settings

Displays and configures failure & alert settings.

	Alert Item	Description

	Cover Error	The lamp cover has not been properly fixed.
	Fan Error	The cooling fan is not operating.
	Lamp Error	The lamp does not light, and there is a possibility that interior
	Lamp Error	portion has become heated.
		portion has become heated.
	Temp Error	There is a possibility that the interior portion has become
	Temp Error	heated.
		heated.
	Air Flow Error	The internal temperature is rising.
	Cold Error	There is a possibility that the interior portion has become
	Cold Error	overcooled.
		overcooled.
	Filter Error	Filter time over.
	Other Error	Other error.
	Other Error	If displaying this error, please contact your dealer.
		If displaying this error, please contact your dealer.
	Schedule Execution	Schedule Execution error. (22)
	Error	Schedule Execution error. (22)
	Error
	Lamp Time Alarm	Lamp time over Alarm Time setting.
	Filter Time Alarm	Filter time over Alarm Time setting.
	Transition Detector	Transition Detector Alarm. (OPTION menu in the User’s
	Alarm	Manual – Operating Guide)

•If STANDBY MODE is set to NORMAL, the projector's power status changes from off to standby state.

	Cold Start	• If STANDBY MODE is set to SAVING, the projector's power
		status changes from standby state to on (the lamp is turned on).
		(SETUP menu in the User’s Manual – Operating Guide)
	Authentication Failure	The SNMP access is detected from the invalid SNMP
	Authentication Failure	community.
		community.

Refer to “Troubleshooting” in the User’s Manual – Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error.

20

Image 20

Contents Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger FunctionContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationManual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonProjector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server AddressAlert Settings Displays and configures failure & alert settingsAuthentication Failure Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayFirst, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference CycleSecurity Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCondition Communication setupOperating Guide Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept