Dukane 8111H user manual Displays and configures network settings

Page 16

3.Network Functions

3.1Configuring and controlling the projector via a web browser (continued)

3.1.3 Network Settings

Displays and configures network settings.

			Item	Description

	IP Configuration			Configures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Configures the IP address when DHCP is disabled.
			Subnet Mask	Configures the subnet mask when DHCP is disabled.
			Default Gateway	Configures the default gateway when DHCP is disabled.
				Configures the name of the projector.
	Projector Name			The length of the Projector Name can be up to 64 alphanumeric
	Projector Name			characters. Only alphabets, numbers and following symbols can be

				used. !"#$%&'()*+,-./:;<=>?@[\]^_`{}~ and space
	sysLocation (SNMP)			Configures the location to be referred to when using SNMP.
	sysLocation (SNMP)			The length of the sysLocation can be up to 255 alphanumeric
				characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
	sysContact (SNMP)			Configures the contact information to be referred to when using SNMP.
	sysContact (SNMP)			The length of the sysContact can be up to 255 alphanumeric
				characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
	DNS Server Address			Configures the DNS server address.
	AMX D.D.			Configures the AMX Device Discovery setting to detect the projector
	AMX D.D.			from the controllers of AMX connected to the same network. For the
	(AMX Device Discovery)			details of AMX Device Discovery, visit the AMX web site.
				URL: http://www.amx.com

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

16

Image 16

Contents Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger FunctionContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationManual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerSetting automatically About IP address Setting manuallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonProjector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server AddressAlert Settings Displays and configures failure & alert settingsAuthentication Failure Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayDisplays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Time difference CycleSecurity Settings Community name Configures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portOperating Guide Communication setupCondition Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept