Dukane 8111H user manual Transmission method, Half-Duplex

Page 51

3. Network Functions

3.8.4 Transmission method

The transmission method can be selected from the menus, only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE. (OPTION menu - SERVICE - COMMUNICATION in the User's Manual -

Operating Guide)

HALF-DUPLEX FULL-DUPLEX

3.8.4.1 HALF-DUPLEX

This method lets the projector make two way communication, but only one direction, either transmitting or receiving data, is allowed at a time.

The method does not allow the projector to receive the data from the computer while waiting for response data from an external device. After the projector receives the response data from an external device or the response limit time is past, the projector can receive the data from the computer.

That means that the projector controls transmitting and receiving the data to synchronize the communication.

To use the HALF-DUPLEX method, set up the RESPONSE LIMIT TIME and BYTES INTERVAL TIMEOUT, following the instruction below.

TCP/IP data

Protocol change

Serial data

Ethernet

 

RS-232C

LAN cable

 

RS-232C cable External device

Computer

 

 

Transmitting data

 

 

 

 

Transmitting data

Discarding data

Response limit

time

 

 

 

Response data

Response data

 

Transmitting data

1)Using the RESPONSE LIMIT TIME menu, set the waiting time for response data from an external device. (OPTION menu - SERVICE -

COMMUNICATION in the User's Manual - Operating Guide) OFF 1s 2s 3s (OFF)

51

Image 51
Contents Messenger Function Thank you for purchasing this projectorWeb control MY Image Still Image Transfer DisplayNetwork Functions Content Main functionsEquipment connection and network setting Configuring and controlling the projector via a web browserMY Image Still image Transfer Display Configuring and controlling via a web browserMessenger Function Required equipment preparation Setup menu in the User’s Manual Operating GuideOpen Network Connections. .2.2.b Manual network connection settingNetwork settings Equipments connectionSet IP address, subnet mask and default gateway for computer Manual network connection settingAbout IP address Setting manually Setting automaticallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowMail Alerts Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Command Control via the NetworkConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordNetwork Information Projector Name Displays the projector name settingsDisplays the Dhcp configuration settings Only displayed when logged on using an Administrator IDDisplays and configures network settings Displays and configures communication port settings Port SettingsClick Apply button to save the settings Smtp Server Address Mail SettingsDisplays and configures e-mail addressing settings Send mailCold Start Alert SettingsDisplays and configures failure & alert settings Authentication FailureAlert Items are shown below Displays and configures schedule settings Schedule SettingsDate Month/Day Description ScheduleDate/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Cycle Time differenceSecurity Settings Configures the community name if Snmp is used Community nameUp to 64 alphanumeric characters Projector Control Adjusts the horizontal picture position Adjusts the vertical picture positionHdmi Detected Displays the current projector status Projector StatusLogoff When Logoff is clicked, the Logon menu is displayed. 14Network Restart Restarts the projector’s network connectionMail Alerts Mail Settings 19Mail Alerts Snmp Settings 17 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 22Manual concise Date/Time Settings 24Still Image Transfer Network Restart on the main menu MY Image Still Image Transfer DisplayMessenger Function Messenger Function Command Control via the Network Following two ports are assigned for the command controlCommunication Port Command Control via the Network TCP #9715 Command FormatReply Error code Header Data length RS-232C command Check Sum ConnectionReply Data format Automatic Connection Break AuthenticationLAN port Control port Connecting devicesCommunication setup Operating GuideCondition HALF-DUPLEX Transmission methodFULL-DUPLEX HALF-DUPLEXDukane Corp AV Service Dept