Dukane 8111H user manual About IP address Setting manually, For example, Setting automatically

Page 8

2.Equipment connection and network setting

2.2Manual network connection setting (continued)

[About IP address] ■ Setting manually

The Network address portion included in the IP address set into your computer should be common with projector’s one. And the entire IP address in the computer should not be overlapped with other equipments in the same network, including the projector.

For example

The projector’s initial settings are as follows.

IP address: 192.168.1.10

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Therefore, specify computer’s IP address as follows.

IP address: 192.168.1.xxx (xxx shows decimal number.)

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Select from 1 to 254 for “xxx” not duplicating with any other equipments. In this case, projector has “192.168.1.10” IP address, specify from 1 to 254 except 10 for computer.

NOTE • “0.0.0.0” cannot be set to the IP address.

•The projector’s IP address can be changed by using the configuration utility via a web browser. (&12)

•If the projector and computer exist in the same network (i.e. network address is common), default gateway can be blank.

•When the projector and computer exist in different networks, default gateway setting is necessary. Contact the network administrator in detail.

■Setting automatically

When DHCP server exists in network, it is possible to assign IP address to the projector and computer automatically.

*DHCP is abbreviation for “Dynamic Host Configuration Protocol” and has the function to provide necessary setting for network like IP address from server to client. A server that has DHCP function is called DHCP server.

8

Image 8

Contents Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger FunctionContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationManual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonProjector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server AddressAlert Settings Displays and configures failure & alert settingsAuthentication Failure Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayFirst, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference CycleSecurity Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCondition Communication setupOperating Guide Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept